Pages: [1]
Author Topic: Maf reading conversion to load  (Read 201 times)
bandyta928
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 57


« on: June 10, 2021, 02:14:33 PM »

Hi. Could someone explain to me where is the difference.
I logged my cars and rl is 100% at 2100rpm wirh around 44g/s. When i calculate load by my own i gets orther result. Load= mass ingested/mass standard. 44x60/2100/2 / 1781x0.00122521= 115% load
« Last Edit: June 10, 2021, 02:19:24 PM by bandyta928 » Logged
BlackT
Hero Member
*****

Karma: +49/-27
Offline Offline

Posts: 966



« Reply #1 on: June 10, 2021, 10:47:11 PM »

You need to put VE in calculation
Logged
redbeart
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #2 on: Yesterday at 04:00:26 AM »

Your calculation is right. But you have to note that your load calculation is before intake model. So you calculated rlfgroh_w but you logged rl_w.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)