Pages: [1]
Author Topic: Bosch M3.2 8D0907558G - Automatic to Manual gearbox problem  (Read 297 times)

Karma: +0/-0
Offline Offline

Posts: 5

« on: August 01, 2021, 02:30:23 AM »

Hello. I have Passat B5 1.8 with 8D0907558G ECU. I swapped gearbox and I have problem with coding this ECU. VCDS won't save new coding for manual gearbox. I think I need correct flash from manual version. Does someone can share correct dump for this ECU so it will work with manual gearbox? Or it is mandatory to buy new ECU from manual gearbox car with immo off? In the web there's very very little info about this ECU.
Pages: [1]
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 18 queries. (Pretty URLs adds 0s, 0q)