Pages: [1]
Author Topic: Difference between Memory layout 29F800 vs 29F800BB  (Read 1557 times)
katoona
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« on: January 05, 2020, 03:38:57 PM »

What is the difference between Memory layout 29F800 vs 29F800BB?

I have a 06A906032HJ ECU (soft.0002) and I used 28F800BB when I read my bin file, but in the list, it says that 29F800 (non-BB) is the correct layout for this ECU.

I am just curious what the difference is?
Logged
nyet
Administrator
Hero Member
*****

Karma: +528/-127
Offline Offline

Posts: 11567


WWW
« Reply #1 on: January 05, 2020, 04:36:07 PM »

B has smaller "boot sectors" near the bottom (BB) (or top BT) of the address space with finer locking/erase granularity.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
katoona
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 19


« Reply #2 on: January 07, 2020, 02:17:54 AM »

Will this give a different result when reading the bin file?
Logged
prj
Hero Member
*****

Karma: +403/-108
Offline Offline

Posts: 4120


« Reply #3 on: January 07, 2020, 07:53:47 AM »

Reading no, writing yes.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 18 queries. (Pretty URLs adds 0s, 0q)