VisualME7Logger CodePlex Project

[FredJ]

I can't find where the compiled package download is. Did the link disappear with codeplex going away?

[jimmcgee5]

https://github.com/sbloom82/VisualME7Logger this ??

[SB_GLI]

I can't find where the compiled package download is. Did the link disappear with codeplex going away?

Yeah, looks like it's gone now.  Here's the latest version.  It may have a few new previously unreleased "features".

[QuickS4]

Pull the eeprom, FF the immo.
Change connection speed to 00
Play with boudrate.
Report your findings.

Mbox doesn't have immo. That's off the table.
Change connection speed, alright how and where? Checked ME7logger didn't see it in there, also checked advanced settings under the com port, same nothing regarding speed. Unless it's labeled differently.

Baud rate, I'll try that, after I figure out the speed connection you mentioned.

Thank you!

Sent from my Pixel XL using Tapatalk

[hurricanetdm]

Mbox doesn't have immo. That's off the table.
Change connection speed, alright how and where? Checked ME7logger didn't see it in there, also checked advanced settings under the com port, same nothing regarding speed. Unless it's labeled differently.

Baud rate, I'll try that, after I figure out the speed connection you mentioned.

Thank you!

Sent from my Pixel XL using Tapatalk

very good software dear friend's thank you all for your job

[dal]

Hi. I'm trying to get this to work, but I'm getting an error when loading an ECU bin, for creating an ECU file.
The error is in the image bellow. From pt-BR to en-US is something like: "The system could not find the specified file in...".

My machine runs Windows 10 x64. Tried too on a Virtual Machine with Windows 7 x32, same error.
I tried to put VisualME7Logger.exe on the root of C:, and the ecu bin too, same error. I dont know why it cant find the file.

If someone can figure out this, I appreciate. Thansk.

[nyet]

Are you really installing from the sources?

Did you try following the instructions in the OP?

http://nefariousmotorsports.com/forum/index.php?topic=4830.msg47392#msg47392

Pay attention to the item in red.

[dal]

Are you really installing from the sources?

Did you try following the instructions in the OP?

http://nefariousmotorsports.com/forum/index.php?topic=4830.msg47392#msg47392

Pay attention to the item in red.

Sorry for not paying attention nyet. Now the Logger creates with success the ECU file.
Thanks for the help!!

[dal]

This thing is awsome. Been playing with it for the last days.
1000 times better for logging my car now.
The only downside is that I need to remove the cluster fuse. But my ECU eeprom is immo-off, so dont matter.
Now I have an good environment setted up for calibrating my car (1984cc stroker, E100, 400whp target).

[BlackT]

I am using vag-commander cable. On nefmoto working without any problems. But on loger i get this error

[BlackT]

With dump KKL calbe,only FT232RQ... The logger is working fine 

[atdub]

Sorry for the question to some but is windows 8 the "minimum" OS or the required OS?

[atdub]

Sorry for the question to some but is windows 8 the "minimum" OS or the required OS?

Did this site die or am I just missing the obvious?

[nyet]

Minimum. Nobody uses win8

[atdub]

Minimum. Nobody uses win8

There we go. all I needed to know thanks