NefMoto > Technical > Flashing and Chipping > Tools for changing ME7 adaptation channels
Pages: [1]
« previous next »
Author Topic: Tools for changing ME7 adaptation channels  (Read 14166 times)
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3
« on: September 03, 2009, 03:32:06 PM »
Here are two programs that allow you to change your adaptation channels.

Lemmiwinks only works over a serial RS232 cable, or USB cable running as a virtual com port.

UniSettings works with FTDI based USB cables.
« Last Edit: November 11, 2009, 11:37:03 AM by Tony@NefMoto » Logged
Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
iznogoud
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 104

Learning junkie
« Reply #1 on: November 04, 2009, 03:06:31 PM »
A couple of pieces of information that my be useful to some people.

Successfully used Lemmiwinks with an FTDI cable that I had purchased on ebay several years ago. The same cable I have used successfully with wbh-diag and VAG-COM/VCDS. The cable was $20-30 if I recall correctly. The generic Windows XP FTDI Serial-USB driver came with the cable and one can easily find it online. My linux boxes recognize the FTDI cable but I have not tried a virtual OS accessing the cable to do tweaking from the hosted OS. We have had limited success so far with hosted OSs using the FTDI OBD2-port cables.

The cars were a B5 S4 2000 (A-box) and a 2001 A4 1.8T (CH-box I think)
« Last Edit: November 04, 2009, 03:09:41 PM by iznogoud » Logged
Audi S4 B5 2000 6sp Cactus Green
Audi A4 B6 Avant 1.8T 2001.5 5sp Santorin Blue
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3
« Reply #2 on: November 11, 2009, 11:37:53 AM »

Thanks for sharing your info!
Logged
Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
ktech
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 29
« Reply #3 on: November 16, 2010, 09:34:19 AM »
Tony

Should the unisettings work with the Vagcom (Ross tech) cable. I tried but no success.
My cable works with you flash tool.
Logged
Jason
Hero Member
*****

Karma: +38/-0
Offline Offline

Posts: 500


Breaks everything!
« Reply #4 on: November 16, 2010, 12:19:03 PM »
Quote from: ktech on November 16, 2010, 09:34:19 AM
Tony

Should the unisettings work with the Vagcom (Ross tech) cable. I tried but no success.
My cable works with you flash tool.

The only way I could successfully get this working was to use the FTDI drivers, with the vendor and hardware ID's changed to that of the vag-com cable in the driver inf.  I may have posted the modified drivers here somewhere before.
Logged
iznogoud
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 104

Learning junkie
« Reply #5 on: November 19, 2010, 08:27:43 PM »
Quote from: Jason on November 16, 2010, 12:19:03 PM
Quote from: ktech on November 16, 2010, 09:34:19 AM
Tony

Should the unisettings work with the Vagcom (Ross tech) cable. I tried but no success.
My cable works with you flash tool.

The only way I could successfully get this working was to use the FTDI drivers, with the vendor and hardware ID's changed to that of the vag-com cable in the driver inf.  I may have posted the modified drivers here somewhere before.

That is good thinking and good hacking! We want some more details on this site or some Wiki section preferably. Nice.
Logged
Audi S4 B5 2000 6sp Cactus Green
Audi A4 B6 Avant 1.8T 2001.5 5sp Santorin Blue
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« Reply #6 on: February 04, 2014, 07:13:00 AM »
I am wondering or i am misunderstanding a thing here.
Little help please? Smiley

Channel 4 :Ch04 : Start Up Fuel Enrich

Channel 5 :Warm Up fuel Enrich

What does this actually mean? I keep mixing between those two.

I have a file that am looking into , trying to learn of.
It starts good when it is stone Cold, and it starts good when it is worm.
It is there inbetween there is a problem. If i have been driving and leave the car for a 20-30 min. Start cranking it gets often flooded. It is too rich.
Which one of those channels do i have to adapt?
Logged
jimmcgee5
Full Member
***

Karma: +7/-7
Offline Offline

Posts: 201
« Reply #7 on: February 04, 2014, 08:18:08 AM »
this should help you out  Grin ,

https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&ved=0CCwQFjAA&url=http%3A%2F%2Fwww.vaglinks.com%2FOBDII%2FEdyJun_Lemmiwinks_for_Dummies.pdf&ei=dwTxUpKMLajB7AbV34HoCQ&usg=AFQjCNF0jnYieKh8gfdnCDs3X9d1KDhpGg&bvm=bv.60444564,d.ZGU
Logged
fknbrkn
Hero Member
*****

Karma: +177/-18
Offline Offline

Posts: 1413


mk4 1.8T AUM
« Reply #8 on: February 04, 2014, 08:26:46 AM »
Quote from: Mocke on February 04, 2014, 07:13:00 AM
I am wondering or i am misunderstanding a thing here.
Little help please? Smiley

Channel 4 :Ch04 : Start Up Fuel Enrich

Channel 5 :Warm Up fuel Enrich

What does this actually mean? I keep mixing between those two.

I have a file that am looking into , trying to learn of.
It starts good when it is stone Cold, and it starts good when it is worm.
It is there inbetween there is a problem. If i have been driving and leave the car for a 20-30 min. Start cranking it gets often flooded. It is too rich.
Which one of those channels do i have to adapt?

ch4
but if you want to fix this problem you need to diagnose you car when the problem appears
in most cases it is coolant sensor fault
Logged
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« Reply #9 on: February 04, 2014, 09:24:10 AM »
No it is not the problem. I am running E85 and live in a very Cold climate.
I have a couple of files that work well at any starts.
I just choose this one in learning purposes.
If i would take a look at the file in Tunerpro. Which maps should i search for Cold and lukewarm starts?
Thanx for answer mate.
Logged
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« Reply #10 on: February 04, 2014, 09:25:52 AM »
Quote from: jimmcgee5 on February 04, 2014, 08:18:08 AM
this should help you out  Grin ,

https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&ved=0CCwQFjAA&url=http%3A%2F%2Fwww.vaglinks.com%2FOBDII%2FEdyJun_Lemmiwinks_for_Dummies.pdf&ei=dwTxUpKMLajB7AbV34HoCQ&usg=AFQjCNF0jnYieKh8gfdnCDs3X9d1KDhpGg&bvm=bv.60444564,d.ZGU

I got that PDF, but i dont get it Smiley.
So, it is channel 4 i should use?
Logged
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556
« Reply #11 on: February 07, 2014, 09:05:19 AM »
If i would take a look at the file in Tunerpro. Which maps should i search for Cold and lukewarm starts?
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • July 05, 2024, 12:09:17 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 16 queries. (Pretty URLs adds 0s, 0q)