fischkopf
Newbie
Karma: +0/-0
Offline
Posts: 8
|
|
« on: February 05, 2017, 10:59:21 AM »
|
|
|
Hi, i have tried to read the Skoda Fabia I 1,9 TDI 2001 ECU 038906019AF When i set up the memory layout and try to read the ecu it sounds like the ecu gets restarted and i can hear something like a pump.. But after a few messages, something like check security communication fails... First i thought maybee there is a cable problem? I use a FTDI / LM339 Cable, what i presume should work.. Is there maybee a different ept/driver bundle that fixes my problems? Thanks
|
|
|
Logged
|
|
|
|
h100vw
Jr. Member
Karma: +0/-0
Offline
Posts: 34
|
|
« Reply #1 on: February 06, 2017, 04:47:58 AM »
|
|
|
Hi, i have tried to read the Skoda Fabia I 1,9 TDI 2001 ECU 038906019AF When i set up the memory layout and try to read the ecu it sounds like the ecu gets restarted and i can hear something like a pump.. But after a few messages, something like check security communication fails... First i thought maybee there is a cable problem? I use a FTDI / LM339 Cable, what i presume should work.. Is there maybee a different ept/driver bundle that fixes my problems? Thanks
It only works on ME7 mate/
|
|
|
Logged
|
|
|
|
fischkopf
Newbie
Karma: +0/-0
Offline
Posts: 8
|
|
« Reply #2 on: February 06, 2017, 12:06:40 PM »
|
|
|
It only works on ME7 mate/
I tought nefmoto works whit EDC15?
|
|
|
Logged
|
|
|
|
nyet
|
|
« Reply #3 on: February 06, 2017, 04:30:34 PM »
|
|
|
I tought nefmoto works whit EDC15?
No, it will not.
|
|
|
Logged
|
|
|
|
fischkopf
Newbie
Karma: +0/-0
Offline
Posts: 8
|
|
« Reply #4 on: February 06, 2017, 11:57:14 PM »
|
|
|
How can i read EDC15?
|
|
|
Logged
|
|
|
|
gman86
|
|
« Reply #5 on: February 07, 2017, 03:23:23 AM »
|
|
|
How can i read EDC15?
With another tool that supports EDC15
|
|
|
Logged
|
|
|
|
fischkopf
Newbie
Karma: +0/-0
Offline
Posts: 8
|
|
« Reply #6 on: February 07, 2017, 05:02:51 AM »
|
|
|
With another tool that supports EDC15
Wich one you suggest? If possible i would prefere to use my ftdi dumb cable... I have tried galletto but nothing happens.... Can Vag k+can commander do this?
|
|
|
Logged
|
|
|
|
nyet
|
|
« Reply #7 on: February 07, 2017, 11:37:50 PM »
|
|
|
Kess, MPPS etc.
|
|
|
Logged
|
|
|
|
fischkopf
Newbie
Karma: +0/-0
Offline
Posts: 8
|
|
« Reply #8 on: February 08, 2017, 12:24:14 AM »
|
|
|
Kess, MPPS etc.
Is there oune i can use whit ftdi cable?
|
|
|
Logged
|
|
|
|
fischkopf
Newbie
Karma: +0/-0
Offline
Posts: 8
|
|
« Reply #9 on: February 08, 2017, 04:57:24 AM »
|
|
|
I have tried Galletto, but no luck, do i need to flasch on bench by pulling the program pin to ground?
|
|
|
Logged
|
|
|
|
_nameless
|
|
« Reply #10 on: February 08, 2017, 07:57:37 AM »
|
|
|
I have tried Galletto, but no luck, do i need to flasch on bench by pulling the program pin to ground?
boot mode with galletto will work
|
|
|
Logged
|
If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
|
|
|
jochen_145
Full Member
Karma: +9/-4
Offline
Posts: 177
|
|
« Reply #11 on: November 08, 2017, 03:20:32 AM »
|
|
|
Now I am confused with this: boot mode with galletto will work Galletto (even the clones and old ones) work on EDC15 on bench, with "normal" protocol. Successfully a 100-times. Why you propose BootMode for flashing ? AFAIK bootmode is just necessary, if the EDC15 is bricked?! But I never tryed to re-cover with bootmode option of Galletto. I though this only works on ME7.. Are you able to re-cover a EDC15 with ME7-BooMode-function of Galletto too ?
|
|
|
Logged
|
|
|
|
birchbark506
|
|
« Reply #12 on: November 11, 2017, 03:22:27 PM »
|
|
|
i tried MPPS on a 2001 mk4 jetta 1.8T and its unable to read just write
|
|
|
Logged
|
|
|
|
vwaudiguy
|
|
« Reply #13 on: November 11, 2017, 08:24:31 PM »
|
|
|
i tried MPPS on a 2001 mk4 jetta 1.8T and its unable to read just write
You have to use a different protocol than what you would normally choose. I can't remember at the moment which I use.
|
|
|
Logged
|
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
|
|
|
birchbark506
|
|
« Reply #14 on: November 11, 2017, 11:36:29 PM »
|
|
|
ok if you remember please let me know
|
|
|
Logged
|
|
|
|
|