Data cable comparison

Pages: 1 [2]

« previous next »

Author

Topic: Data cable comparison (Read 22999 times)

Drehkraft

Jr. Member

Karma: +9/-0
Offline

Offline

Posts: 46

	Re: Data cable comparison « Reply #15 on: January 01, 2010, 11:47:44 PM »

Opened up my vagtacho 2.2 cable today....

Its an Atmega8 processor with FtdI245 chip. I have dump files if anyone needs them. We were unable to get it to work with any flash software. I'm guessing you need a ftdi232 chipset.


	Logged

vwraceguy

Jr. Member

Karma: +5/-0
Offline

Offline

Posts: 26

	Re: Data cable comparison « Reply #16 on: January 02, 2010, 07:59:27 AM »

I opened up my KEY-USB (not a clone)

serial chip is a FT232RL

micro is ATMEGA8 16AI 0425G

k-line (x2) are 33290 XAHG

HWID: USB\VID_0403&PID_FA24\RT000001

I was able to use modified FTDI drivers to use this ID and it appears that the serial port is working and set to COM1. However, i was unable to get Galletto (or anything else) to work.

I also tried modifying the drivers that come with the Galletto software in case it was looking for a specific device name, but still get 'port unavailable'

Galletto drivers:
svcdesc="FTD2XX.SYS FT8U2XX device driver"
"FTDI FT8U2XX Device"
"FT2232C Channel A"

Regular FTDI drivers:
"USB Serial Converter"
"Serial Port (Com1)"

Rosstech drivers:
"Ross-Tech Direct USB Interface"


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1579

	Re: Data cable comparison « Reply #17 on: July 01, 2013, 10:44:23 PM »

Unfortunatelly i killed my dumb vagcom cable yesterday by connect it the wrong way around to my bench flashing power source.
I tried to get a galletto, mpps and vcds 11.11 cable to work in dumb mode but i had no success.

I couldt find a solution to put it into dumb mode via software. So the vcds 11.11 china cable didnt pop up with a com port.
Is there a driver for the ross-tech clone vcds 11.11 cable to work in dumb mode only?


	Logged

ddillenger

Hero Member

Karma: +639/-21
Offline

Offline

Posts: 5640

	Re: Data cable comparison « Reply #18 on: July 01, 2013, 10:53:18 PM »

http://nefariousmotorsports.com/forum/index.php?topic=3138.0title=

Read that. You can download and install the VCP drivers, not sure it'll work with a clone however.


	Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

May 21, 2024, 09:21:34 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search