Pages: 1 ... 11 12 [13]
Author Topic: a3 3.2 022906032CB ME7.1.1G advice  (Read 83419 times)
Mikhail
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 136


« Reply #180 on: March 23, 2019, 12:25:47 PM »

The car breakdown continues and now stopped to rew over 5000rpm and no power. This appeared after harsh gear change during tire burning. Could timing go wrong cause This? It does this by throttle.
Logged
Mikhail
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 136


« Reply #181 on: March 26, 2019, 12:02:30 PM »

It was loosen intake which were able to get sucked blocked.
Logged
Mikhail
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 136


« Reply #182 on: December 16, 2019, 06:50:14 AM »

Can one injector be set Off? Car is standing a little broken, May be standing a looong time. Cyl 2 has Lost compression and would like To run the engine now and then while waiting the time To do something with it.
Logged
DT
Full Member
***

Karma: +20/-1
Offline Offline

Posts: 184


« Reply #183 on: December 16, 2019, 10:44:42 AM »

Can one injector be set Off? Car is standing a little broken, May be standing a looong time. Cyl 2 has Lost compression and would like To run the engine now and then while waiting the time To do something with it.
Sure, would need a little patch but you would also need copy trim from other bank or run open loop.
Logged

Mikhail
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 136


« Reply #184 on: February 03, 2020, 12:05:52 PM »

Sold. Thinking of early e90 318 bmw. It has ME9.2? Is It diy tunable? Does the N46 engine hold boost with e85?
Logged
Pages: 1 ... 11 12 [13]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 17 queries. (Pretty URLs adds 0s, 0q)