NefMoto > Technical > Reverse Engineering > N249 activation for overboost protection
Pages: [1]
« previous next »
Author Topic: N249 activation for overboost protection  (Read 9208 times)
elRey
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 565
« on: January 06, 2014, 12:11:43 AM »
I've seen this reference by many people but have not seen anyone quote documentation or disassembled code of such function.

I have not been able to find it myself either. I say it doesn't exist, but would like someone to verify.

I prefer 1.8T application, but would accept 2.7TT if found.

Thanks,
Rey
« Last Edit: January 06, 2014, 12:56:45 AM by elRey » Logged
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194
« Reply #1 on: January 06, 2014, 05:36:07 AM »
I was looking at some code in my Volvo file last week and found it to be BGPLGU.  Might be way off here, but I think this might be what you are looking for?
Logged


How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
phila_dot
Hero Member
*****

Karma: +172/-11
Offline Offline

Posts: 1709
« Reply #2 on: January 06, 2014, 06:16:48 AM »
IIRC, it's never used for overboost protection.

With a negative pedal gradient it is activated when a boost spike is predicted such as from a closing throttle.

The function is disabled when target boost pressure is greater than atmospheric pressure.
Logged
userpike
Hero Member
*****

Karma: +22/-1
Offline Offline

Posts: 763
« Reply #3 on: January 06, 2014, 08:40:15 AM »
not sure if this will help out but http://nefariousmotorsports.com/forum/index.php?topic=2026.msg19187#msg19187:
Logged
elRey
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 565
« Reply #4 on: January 06, 2014, 09:04:11 AM »
Thanks for the link. Unfortunately it doesn't shed any more light on this specific question.
« Last Edit: January 06, 2014, 09:13:51 AM by elRey » Logged
userpike
Hero Member
*****

Karma: +22/-1
Offline Offline

Posts: 763
« Reply #5 on: January 06, 2014, 09:50:16 AM »
Quote from: elRey on January 06, 2014, 09:04:11 AM
Thanks for the link. Unfortunately it doesn't shed any more light on this specific question.

I just did a search in the FR for "Schubumluftventil" and found 2 modules, LDUVST and DLDUV they say nothing I can see about anything having to do with overboost. I also tried just "Umluftventil" but it brought me to every spot the first search did through all the pages. I was thinking maybe the definition would be in some other module and the search would find it but there wasn't anything else. This leads me to believe the N249/DV doesn't have a function for overboost.

Thinking about this for a sec I don't want the DV to dump while the turbo is overboosting because taking the load off the compressor wheel I believe would make for an over spin condition without the N75/WG being dumped also. I could be wrong.
Logged
elRey
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 565
« Reply #6 on: January 06, 2014, 10:23:15 AM »
Quote from: userpike on January 06, 2014, 09:50:16 AM
I just did a search in the FR for "Schubumluftventil" and found 2 modules, LDUVST and DLDUV they say nothing I can see about anything having to do with overboost. I also tried just "Umluftventil" but it brought me to every spot the first search did through all the pages. I was thinking maybe the definition would be in some other module and the search would find it but there wasn't anything else. This leads me to believe the N249/DV doesn't have a function for overboost.

I also tried searching doc for B_ldsua, B_ldsuas, B_ldsuad AND I identified variables in disassembly and search for all writes. I found the same as you. Hence, why I brought this up.

Quote from: userpike on January 06, 2014, 09:50:16 AM
Thinking about this for a sec I don't want the DV to dump while the turbo is overboosting because taking the load off the compressor wheel I believe would make for an over spin condition without the N75/WG being dumped also. I could be wrong.

Very good point.
« Last Edit: January 06, 2014, 10:35:04 AM by elRey » Logged
elRey
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 565
« Reply #7 on: January 06, 2014, 01:53:05 PM »
Quote from: phila_dot on January 06, 2014, 06:16:48 AM
IIRC, it's never used for overboost protection.

With a negative pedal gradient it is activated when a boost spike is predicted such as from a closing throttle.

The function is disabled when target boost pressure is greater than atmospheric pressure.

It would be nice to know how you came to this understanding.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12235


WWW
« Reply #8 on: January 06, 2014, 01:57:11 PM »
Quote from: userpike on January 06, 2014, 09:50:16 AM
Thinking about this for a sec I don't want the DV to dump while the turbo is overboosting because taking the load off the compressor wheel I believe would make for an over spin condition without the N75/WG being dumped also. I could be wrong.

Well put. Thanks for pointing this out.

BTW this is also why boost leaks are so bad, and another reason to not remove underboost -> limp protection.
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194
« Reply #9 on: January 06, 2014, 03:14:17 PM »
Quote from: elRey on January 06, 2014, 01:53:05 PM
It would be nice to know how you came to this understanding.

Same, +1.
Logged


How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
elRey
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 565
« Reply #10 on: January 06, 2014, 03:23:18 PM »
To seed the continued discussion and convey I'm looking for examples of documentation and/or code:

The function LDUVST describes N249 control. No where in it does it reference B_ldob,E_ldo or any other upper limit (boost or MAF).

And no where else in doc is are variables B_ldsuad, B_ldsuas, B_ldsua set. I confirmed the same in 1.8T disassembled code.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • May 14, 2024, 12:25:24 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0s, 0q)