|
Title: Help whit b5 AEB to me7.5 032hj ecu, ready runing Post by: naach_ on August 15, 2016, 09:18:57 AM good afternoon guys , first remind you that use google translator , so sorry for any errors .
Alright guys , finally I got my install 1.8T AEB , the entire APU harnes engine with 032 ecu HJ golf mk4 , and all its components , electronic throttle map, and all its components , all pinout and car booted off inmo but I have a number of problems , apart from failures due to lack of components, such as N249 , N112 , VVT , second sensor o2 typical ,I have a series of failures that I think are influencing the adaptation of the mixture first probe lambda broadband this pineada and measuring well according VAGCOM compared to external wideband I have installed, mount injectors 343-4 EV6 bar, linearizing with krkte, but channel 32 of adjusting VAGCOM not adapted, the engine in idle state has a afr 12.3, it may be that by not bringing the actuator VVT, so do not want to adapt the mix, the canister is connected, I I'm going crazy, there is possibility of canceling the ecu that ruling and the rest of the error DTCs easy way? Then we ready faults that gives me, I hope can help me, greetings and thanks in advance 17526-p1523- abs crash signal for controller-open circuit 17841-p1433-secondary air pump relay (J299) -open circuit 17939-p1531- camshaft timing open circuit adjustment- 17840-p1432-secundari air Inyection open circuit solenoid valve- 17695-p1287-bost presure valve (N249) -open circuit 18057-p1649-powertrain data bus, implausible signal controller for abs 18058-p1650-poertrain data bus, missing message for instrument cluster the question is trying to figure out why not try to adapt mix, thanks and best regards, Title: Re: Help whit b5 AEB to me7.5 032hj ecu, ready runing Post by: k0mpresd on August 15, 2016, 09:34:30 AM 17841-p1433-secondary air pump relay (J299) -open circuit 17939-p1531- camshaft timing open circuit adjustment- 17840-p1432-secundari air Inyection open circuit solenoid valve- 17695-p1287-bost presure valve (N249) -open circuit the question is trying to figure out why not try to adapt mix, thanks and best regards, those codes are the answer. they need to be disabled via ESKONF. Title: Re: Help whit b5 AEB to me7.5 032hj ecu, ready runing Post by: nyet on August 15, 2016, 10:11:09 AM the question is trying to figure out why not try to adapt mix, thanks and best regards, Fix all your codes, then go back and worry about that. Title: Re: Help whit b5 AEB to me7.5 032hj ecu, ready runing Post by: naach_ on August 15, 2016, 10:36:27 AM those codes are the answer. they need to be disabled via ESKONF. How do I disable error DTCs ? even I have no experience and never turn off those DTCs error , I did not need , you can help ? I leave the mapping if you can help me , thanks I can not delete the file, not how. apologies , Title: Re: Help whit b5 AEB to me7.5 032hj ecu, ready runing Post by: k0mpresd on August 15, 2016, 10:42:42 AM How do I disable error DTCs ? even I have no experience and never turn off those DTCs error , I did not need , you can help ? I leave the mapping if you can help me , thanks remove this linked file and pm me for email address and i will help you. Title: Re: Help whit b5 AEB to me7.5 032hj ecu, ready runing Post by: naach_ on August 15, 2016, 10:52:46 AM remove this linked file and pm me for email address and i will help you. I can not delete the file, not how. apologies , Title: Re: Help whit b5 AEB to me7.5 032hj ecu, ready runing Post by: nyet on August 15, 2016, 10:55:43 AM Modify your post, and uncheck the box:
Attached: Uncheck the attachments you no longer want attached: WinOLS (Audi A4 (stage1_343cc_linearizados) - 362287) Title: Re: Help whit b5 AEB to me7.5 032hj ecu, ready runing Post by: naach_ on August 15, 2016, 11:10:07 AM Modify your post, and uncheck the box: Attached: Uncheck the attachments you no longer want attached: WinOLS (Audi A4 (stage1_343cc_linearizados) - 362287) allready delete the file, thanks nyet |