|
Title: 2.0Tfsi throttle body only opening 45-50% max whilst under load Post by: Richym on March 18, 2018, 12:18:56 PM I have an Audi S3 I’m stage 2+ tuning. When under load on dyno the car will only half open the throttle body. I’ve used same sw on other cars and had no issue. Also dose the same when using stock software.
Tried resetting adaptions. Has anyone seen this before? Title: Re: 2.0Tfsi throttle body only opening 45-50% max whilst under load Post by: Khendal on March 18, 2018, 03:16:33 PM I have an Audi S3 I’m stage 2+ tuning. When under load on dyno the car will only half open the throttle body. I’ve used same sw on other cars and had no issue. Also dose the same when using stock software. Tried resetting adaptions. Has anyone seen this before? Have you used software of another car? Or have you mounted engine and sensor of a different car? Title: Re: 2.0Tfsi throttle body only opening 45-50% max whilst under load Post by: gman86 on March 18, 2018, 04:33:00 PM Logs? Files?
Title: Re: 2.0Tfsi throttle body only opening 45-50% max whilst under load Post by: Richym on March 20, 2018, 04:43:14 AM logs and files attached
Title: Re: 2.0Tfsi throttle body only opening 45-50% max whilst under load Post by: gman86 on March 20, 2018, 03:10:35 PM logs and files attached Is this car DSG? Is the DSG mapped? Title: Re: 2.0Tfsi throttle body only opening 45-50% max whilst under load Post by: Khendal on March 20, 2018, 04:40:49 PM logs and files attached Have you a def files? all i have don't match :( Title: Re: 2.0Tfsi throttle body only opening 45-50% max whilst under load Post by: Richym on March 20, 2018, 11:09:19 PM Is this car DSG? Is the DSG mapped? It's DSG I've tested with and without DsG mapped same result Title: Re: 2.0Tfsi throttle body only opening 45-50% max whilst under load Post by: gman86 on March 21, 2018, 12:00:15 AM It's DSG I've tested with and without DsG mapped same result Log Accel pedal, torque specified by ASR and Torque reduction. MDNORM is stock, try setting to 340Nm. |