|
Title: 1C0920951J KOMBI+WEGFAHRS. M73 V02 (04 Beetle Turbo S 6MT, Marelli) Post by: miigotu on April 10, 2018, 11:59:23 PM I attached the file I pulled from it with vagtacho, I dont know if it is pulled correctly. Car runs, immo and vin are correct and keys are matched just fine, but I have a steady ON immobilizer light. When I reset the cluster it jumps back to the mileage it was when I first pulled the skc (pin 2116). When I log into instruments with the code in vcds and then go put the same pin in adaptation block 50 (this is not a cluster swap, its the original cluster, and the ecu is NOT immo defeated), it just says "Wait" rather than grabbing the vin/immo id again and adapting.
Also, vagtacho tells me the pin is 0324, but that pin fails lol, 2116 is what has worked for both ecu and cluster. I dont know if someone can provide a zeroed out eeprom or what, maybe its just a bad checksum? Bad mileage change? IDK, but this is really frustrating me, I dont even know if I pulled the bin right... Vin and immo if it matters: 3VWFE31C64M405673 VWZ5Z0C7161043 Title: Re: 1C0920951J KOMBI+WEGFAHRS. M73 V02 (04 Beetle Turbo S 6MT, Marelli) Post by: _nameless on April 11, 2018, 03:34:04 AM the read you posted is shit. you wont be pulling any info from variant a4 chassis cars with a clone vagtacho.
Title: Re: 1C0920951J KOMBI+WEGFAHRS. M73 V02 (04 Beetle Turbo S 6MT, Marelli) Post by: miigotu on April 11, 2018, 08:06:55 AM Who says its a clone? Anyways, how SHOULD I read it via odb2 port? I can't get the eeprom flasher to communicate
Title: Re: 1C0920951J KOMBI+WEGFAHRS. M73 V02 (04 Beetle Turbo S 6MT, Marelli) Post by: _nameless on April 11, 2018, 08:18:51 AM Who says its a clone? Anyways, how SHOULD I read it via odb2 port? I can't get the eeprom flasher to communicate because real tools dont have issues reading this cluster, clones do. If you did youd have a original tool youd have factory support and not asking online form for help. :PTitle: Re: 1C0920951J KOMBI+WEGFAHRS. M73 V02 (04 Beetle Turbo S 6MT, Marelli) Post by: k0mpresd on April 11, 2018, 09:18:02 AM eh, vagtacho sucks on any MM cluster. genuine or not.
i use carprog for audi/beetle mm cluster. 100% success. Title: Re: 1C0920951J KOMBI+WEGFAHRS. M73 V02 (04 Beetle Turbo S 6MT, Marelli) Post by: miigotu on April 11, 2018, 10:21:08 AM eh, vagtacho sucks on any MM cluster. genuine or not. i use carprog for audi/beetle mm cluster. 100% success. Thanks for legit help. Wouldnt happen to have an original dump in case mine is not recoverable would you? Title: Re: 1C0920951J KOMBI+WEGFAHRS. M73 V02 (04 Beetle Turbo S 6MT, Marelli) Post by: k0mpresd on April 14, 2018, 07:24:46 PM attached.
Title: Re: 1C0920951J KOMBI+WEGFAHRS. M73 V02 (04 Beetle Turbo S 6MT, Marelli) Post by: miigotu on April 17, 2018, 03:05:38 AM attached. Thanks! So is carprog the only way I should flash this (I dont have one yet) or do you think flashing with tacho might work? Title: Re: 1C0920951J KOMBI+WEGFAHRS. M73 V02 (04 Beetle Turbo S 6MT, Marelli) Post by: miigotu on April 17, 2018, 03:28:54 AM I noticed thats a format match to the last 2048 bytes of my eep dump with tacho, ill see how it works out tomorrow if I cant get a proper 2048 only Ill add the garbage data to the top 2048 and try flashing that:
Code: head -c2048 1C0920951J.eep > 1C0920951J_top_2048.eep |