|
Title: Med9 checksum Post by: jastr on May 27, 2018, 12:31:28 AM Are there any tools to calculate med9 checksum on vags? I know the eeprom tool can do it on the eeprom but any other tools that can do it on all the areas?
Title: Re: Med9 checksum Post by: gman86 on May 27, 2018, 02:58:16 AM Are there any tools to calculate med9 checksum on vags? I know the eeprom tool can do it on the eeprom but any other tools that can do it on all the areas? Any tool that writes MED9 will do the checksum too. It's not needed. Title: Re: Med9 checksum Post by: jastr on May 27, 2018, 03:05:04 AM Any tool that writes MED9 will do the checksum too. It's not needed. Not bdm tools? Title: Re: Med9 checksum Post by: birchbark506 on May 27, 2018, 04:04:46 AM im use if you use mpps it dose the check sum while flashing it to ecu, or if you have winols you can check sum using that, and i think i seen a med9check sum program on here some where
Title: Re: Med9 checksum Post by: jastr on May 27, 2018, 04:09:06 AM Winols requires you to have that license to checksum it.
Title: Re: Med9 checksum Post by: birchbark506 on May 27, 2018, 04:18:11 AM here try this here is the med9sum i was talking about
Title: Re: Med9 checksum Post by: gman86 on May 27, 2018, 04:26:45 AM Not bdm tools? Why do you need to BDM? But yes, BDM tools should still checksum the flash. Title: Re: Med9 checksum Post by: jastr on May 27, 2018, 05:48:24 AM here try this here is the med9sum i was talking about What where you linking to?Title: Re: Med9 checksum Post by: birchbark506 on May 27, 2018, 05:56:18 AM jastr what do you mean, i added the exe file for checksum for med9 all you do is drop and drag file to the exe and it will make other file with ok at the end
Title: Re: Med9 checksum Post by: jastr on May 27, 2018, 05:57:28 AM jastr what do you mean, i added the exe file for checksum for med9 all you do is drop and drag file to the exe and it will make other file with ok at the end Isn’t it just for checksum eeprom? Title: Re: Med9 checksum Post by: birchbark506 on May 27, 2018, 07:31:04 AM no im sure i used it on bin files as well.
Title: Re: Med9 checksum Post by: nyet on May 27, 2018, 10:13:18 AM no im sure i used it on bin files as well. Don't know much about med9, but i am fairly certain the checksum algorithms are very different, and it is unlikely the same tool will work on both eeprom and flash. Title: Re: Med9 checksum Post by: littco on May 28, 2018, 08:36:13 AM no im sure i used it on bin files as well. That .exe is only for the EEPROM checksums. If you BDM you need to use Winols really to check sum it 1st then flash on.. Title: Re: Med9 checksum Post by: cherry on May 28, 2018, 09:33:02 AM If you want to flash your ecu without car you can also make immo off and then write OBD as usual...
|