|
Title: communication,,just help me look Post by: dclifford40 on May 28, 2018, 01:53:58 PM Noob, just signed up, but been poking around for a while. Forums are not my thing,,kind of hard to find info easily.
Have vag hex cable, clicked off the background check in the Ross software, closed that, refreshed devices on the Nefmoto software,it read the cable, plugged in my cable to the DLC,,turned the key on, green light on the cable. I just want to download my stock info from the ecm. Played with the baud rate,,to no avail,,no link 2003 US B6 A4 TQ 1.8t Im a pro mechanic, 30+ years experience, time to start tweeking,, thanks for the help,,ill keep reading Title: Re: communication,,just help me look Post by: adam- on May 28, 2018, 11:21:36 PM Just buy an FT232RL cable.
Title: Re: communication,,just help me look Post by: bobbyz0r on May 29, 2018, 01:20:57 PM Just buy an FT232RL cable. A genuine VCDS HEX-CAN cable should work perfectly fine, especially if its coming up on the list of FTDI devices on Nefmoto Flasher. Might help if OP posts the log output. Title: Re: communication,,just help me look Post by: nyet on May 29, 2018, 01:30:05 PM A genuine VCDS HEX-CAN cable should work perfectly fine, especially if its coming up on the list of FTDI devices on Nefmoto Flasher. Might help if OP posts the log output. Agreed. It is worth noting that the vcds driver can conflict with the FTDI driver in some cases. I found I had to do the following to recover: 1) uninstall both VCDS and FTDI drivers 2) install VCDS drivers and disable intelligent mode 3) install FTDI driver |