|
Title: TVUB calibration for 440cc green giant injector Post by: pieros_net on February 25, 2019, 04:49:52 PM Hi Guys,
just I would like to know by you if my strategy to calibrate TVUB map for the new injector is correct. 400cc green giant are working with 4 bar FPR I'm going to do as follows: use the attached summary calibration spec sheet. FNPW_OFFSET values will be multiplied with value present on another table that matching with a 60 PSI (mor or less 4 bar) is it ok? thank you Title: Re: TVUB calibration for 440cc green giant injector Post by: doublerwest on March 17, 2023, 09:12:30 PM Hi Guys, Just to throw this out here I dug up these values for 440cc Bosch injectors I was able to pull from a decently tuned file someone gave me 4b0906018ch file k04-015 turbo . Hope this helps someone!just I would like to know by you if my strategy to calibrate TVUB map for the new injector is correct. 400cc green giant are working with 4 bar FPR I'm going to do as follows: use the attached summary calibration spec sheet. FNPW_OFFSET values will be multiplied with value present on another table that matching with a 60 PSI (mor or less 4 bar) is it ok? thank you *3bar krkte-399cc krkte-0.07404ms 8v 10v 12v 14v 16v 2.699 1.539 1.117 0.728 0.523 Title: Re: TVUB calibration for 440cc green giant injector Post by: jdm on March 17, 2023, 11:20:11 PM This will get you in the ball park at 4bar:
KRKTE = 0.0586 7v 10v 12v 14v 17.8v 3.6111 1.5895 1.0001 0.7174 0.5601 FKKVS will need some work at idle and low pulse widths due to non linear behavior. |