Hi Guys,
just I would like to know by you if my strategy to calibrate TVUB map for the new injector is correct.
400cc green giant are working with 4 bar FPR
I'm going to do as follows:
use the attached summary calibration spec sheet.
FNPW_OFFSET values will be multiplied with value present on another table that matching with a 60 PSI (mor or less 4 bar)
is it ok?
thank you
Just to throw this out here I dug up these values for 440cc Bosch injectors I was able to pull from a decently tuned file someone gave me 4b0906018ch file k04-015 turbo . Hope this helps someone!
*3bar
krkte-399cc
krkte-0.07404ms
8v 10v 12v 14v 16v
2.699 1.539 1.117 0.728 0.523
