|
Title: Noob Needing help cuz I has the dumb Post by: STKAllroad on July 14, 2019, 12:57:23 PM So I have tried to fix this on my own and researched before posting and I dont know where else to turn so here we are.
In the beggining my tuner set up my Flasher and my ME7 logger. It worked great and I have never had a problem. As time went on my old computer became extremly slow and I was forced onto a new one. I made sure (or so I thught) all my filed matched up to the old ones. So on Nefmoto Flasher I was just finally able to read the cable today. Cable is a Real Rosstech cable. In dumb mode. For the longest time it would not register it. So Thats fixed i guess? But for ME7Logger. It does not let me log. It comes up with: Logged data size is 126 bytes. Really logged are 72 entries with 126 bytes. FTDI library version 30214 can't open FTDI interface, error=2 Initialization failed, exiting ... exiting (cause=0x1)... This is with FDTI Selected as the COMM Port, I have Tried COMM Ports 1,2,3, AND 4. JUST DOES NOT WORK I have what I think are all the files I need. Not sure where else to go. I have reached out to tuner but he is busy and cant help. Title: Re: Noob Needing help cuz I has the dumb Post by: Blazius on July 14, 2019, 01:16:18 PM So I have tried to fix this on my own and researched before posting and I dont know where else to turn so here we are. In the beggining my tuner set up my Flasher and my ME7 logger. It worked great and I have never had a problem. As time went on my old computer became extremly slow and I was forced onto a new one. I made sure (or so I thught) all my filed matched up to the old ones. So on Nefmoto Flasher I was just finally able to read the cable today. Cable is a Real Rosstech cable. In dumb mode. For the longest time it would not register it. So Thats fixed i guess? But for ME7Logger. It does not let me log. It comes up with: Logged data size is 126 bytes. Really logged are 72 entries with 126 bytes. FTDI library version 30214 can't open FTDI interface, error=2 Initialization failed, exiting ... exiting (cause=0x1)... This is with FDTI Selected as the COMM Port, I have Tried COMM Ports 1,2,3, AND 4. JUST DOES NOT WORK I have what I think are all the files I need. Not sure where else to go. I have reached out to tuner but he is busy and cant help. Use connection mode slow-0x00 , turn ignition on, connect wait for connect, start car. Title: Re: Noob Needing help cuz I has the dumb Post by: nyet on July 14, 2019, 09:29:33 PM "can't open FTDI interface, error=2" is not a connect issue, it is a driver issue.
Try the vcp drivers and enable vcp, assign it a com port. alternately, get an ebay ftdi cable and hope it works. They're cheap though so you can always try a few different ones. Title: Re: Noob Needing help cuz I has the dumb Post by: Blazius on July 15, 2019, 05:36:13 AM "can't open FTDI interface, error=2" is not a connect issue, it is a driver issue. Try the vcp drivers and enable vcp, assign it a com port. alternately, get an ebay ftdi cable and hope it works. They're cheap though so you can always try a few different ones. Yes try the ftdi as com port driver then use 0x00 to connect. Should work then. |