|
Title: wideband on 2.7t Post by: dilly on September 26, 2019, 11:34:38 PM wondering what all you 2.7t guys are using for widebands? i have an aem setup but i dont see the point in installing it only to one bank? how is the second bank monitored? or are you guys running the dual sensor setups
Title: Re: wideband on 2.7t Post by: armageddon on September 27, 2019, 02:13:34 AM I am using a Ld performance wideband( "same" as innovate but cheaper) on bank1, its easily moved to bank2
Title: Re: wideband on 2.7t Post by: nyet on September 27, 2019, 02:41:33 PM I have a single channel zeitronix which has been reasonably reliable
Nice to be able to log actual manifold pressure accurately as well, as i have a pressure sensor for it too. Title: Re: wideband on 2.7t Post by: dilly on September 27, 2019, 03:19:47 PM So I guess since I don’t have a zt-2/4 just put the sensor in one of the banks and if I suspect something just swap banks?
Guy I bought my wheels from gave me a dual gauge defrost vent pod (3D printed) Just don’t want to leave one pod open you know But thought it didn’t make much sense to only monitor one bank on a twin spoolie engine unless you’re big single or something Title: Re: wideband on 2.7t Post by: nyet on September 27, 2019, 06:06:42 PM So I guess since I don’t have a zt-2/4 just put the sensor in one of the banks and if I suspect something just swap banks? Guy I bought my wheels from gave me a dual gauge defrost vent pod (3D printed) Just don’t want to leave one pod open you know But thought it didn’t make much sense to only monitor one bank on a twin spoolie engine unless you’re big single or something Well, you can always eyeball the narrow band voltages to spot bank discrepancies... Title: Re: wideband on 2.7t Post by: dilly on September 27, 2019, 06:33:27 PM Well, you can always eyeball the narrow band voltages to spot bank discrepancies... gotcha, thanks |