|
Title: MSD80/81 torque intervention - closing TB Post by: ballaownz on August 25, 2020, 05:21:01 PM hello guys, noob question...
Im tuning a single turbo N54 - MSD81 and Im getting some torque intervention. The car is closing TB . I found in Damos 3 variables to inhibit torque intervention lc_tq_lim_inh - logical constant inhibition torque intervetion for safety lc_tq_lim_inh_fast - logical constant inhibition torque intervetion for safety for fast path lc_tq_lim_inh_slow - logical constant inhibition torque intervetion for safety for slow path All 3 are set to 0 on ORI. Can I set one of them to 1 to disable torque intervention? Title: Re: MSD80/81 torque intervention - closing TB Post by: prj on August 26, 2020, 01:10:20 AM No.
And that's not why it's not closing throttle either. Title: Re: MSD80/81 torque intervention - closing TB Post by: ballaownz on August 28, 2020, 08:39:35 PM No. And that's not why it's not closing throttle either. I was talking to a friend and he told me that torque intervention is outside map area. Car is closing TB even with less boost than boost limiter =( Title: Re: MSD80/81 torque intervention - closing TB Post by: overspeed on August 29, 2020, 09:34:39 AM No, I Said to request more than 19psi you shall deal with maps witch are outside cks from regular tools (like kess)...unless kess fixed.
Everytime i changed anything relatei to Optimal torque I had no start and cks error...but it was 3 or 4 years ago Title: Re: MSD80/81 torque intervention - closing TB Post by: ballaownz on September 06, 2020, 03:32:35 PM No, I Said to request more than 19psi you shall deal with maps witch are outside cks from regular tools (like kess)...unless kess fixed. Everytime i changed anything relatei to Optimal torque I had no start and cks error...but it was 3 or 4 years ago fixed tb closing writing with MHD. ;) and yes, very weird random cks error writing with NewGenius. If I touch torque intervention variables, car doesnt start. Title: Re: MSD80/81 torque intervention - closing TB Post by: Samtuning on October 22, 2020, 02:07:17 AM its closing throttle because actual load might be higher than requested
|