|
Title: ME7.5.10 -IMMO OFF - only with flashing possible? Post by: hadilen on May 17, 2021, 09:10:56 AM [/flash]Hi! First of all im a n00b at all.
I´m having problem with my precat Oxygen Sensor and i replaced every damned sensor in the car that are part of the injection system. But nothing helped. The DTC still throwing at me. P0135 - O2 Sensor Heating Circut Failure. (ITs a new one from Bosch.) Harnesses are all well. Heating and O2 Sensor keep giving signal. But i think they are now plausible. So the last possibility could be the ECU that has a problem, in my eyes. . Is there any option for me to Flash the Immo-OFF with the NEFMoto ECU Flasher over OBD with the Blue K409 KKL Cable, for testing the spare ECU i bought a week ago? Whats the easisest way to swap the ECU of my VW POLO 2001? Can the VWTOOL help me with this problem of the IMMO? I have tried to read the EEPROM for IMMO PIN with VAG-K-CAN COMMANDER Could anyone tell if this was correct made? The both files are attached. thank you in advance Title: Re: ME7.5.10 -IMMO OFF - only with flashing possible? Post by: stuydub on May 17, 2021, 10:19:04 AM u cant flash immo file with NEFMOTO software as BOOTMODE required but u can search for ME7GUI and u can flash with that in BOOTMODE.
me7gui.zip http://nefariousmotorsports.com/forum/index.php?topic=1168.msg66037#msg66037 Title: Re: ME7.5.10 -IMMO OFF - only with flashing possible? Post by: stuydub on May 17, 2021, 10:23:34 AM [/flash]Hi! First of all im a n00b at all. I´m having problem with my precat Oxygen Sensor and i replaced every damned sensor in the car that are part of the injection system. But nothing helped. The DTC still throwing at me. P0135 - O2 Sensor Heating Circut Failure. (ITs a new one from Bosch.) Harnesses are all well. Heating and O2 Sensor keep giving signal. But i think they are now plausible. So the last possibility could be the ECU that has a problem, in my eyes. . Is there any option for me to Flash the Immo-OFF with the NEFMoto ECU Flasher over OBD with the Blue K409 KKL Cable, for testing the spare ECU i bought a week ago? Whats the easisest way to swap the ECU of my VW POLO 2001? Can the VWTOOL help me with this problem of the IMMO? I have tried to read the EEPROM for IMMO PIN with VAG-K-CAN COMMANDER Could anyone tell if this was correct made? The both files are attached. thank you in advance according to files there both immo 2 so if this is the case dont need immo off just use VCDS and adapt as per guide on RossTech Title: Re: ME7.5.10 -IMMO OFF - only with flashing possible? Post by: hadilen on May 17, 2021, 12:17:31 PM It should be IMMO3 in my 2001 Polo because when i click on Immobilizer with CarPort Software it shows a VIN Number and a other number. So i think i must only get the Pin Code.
How should i do this? K+CAN Commander not worked for me. Title: Re: ME7.5.10 -IMMO OFF - only with flashing possible? Post by: hadilen on May 17, 2021, 12:30:07 PM u cant flash immo file with NEFMOTO software as BOOTMODE required but u can search for ME7GUI and u can flash with that in BOOTMODE. me7gui.zip http://nefariousmotorsports.com/forum/index.php?topic=1168.msg66037#msg66037 could i flash a "virgin" IMMO Flash file? Sry if i didn´t understand the logic of the IMMO and the ECU´s. My Car is a Polo 6n2 2001. So IMMO3 should be used since 05/2000 afaik. Title: Re: ME7.5.10 -IMMO OFF - only with flashing possible? Post by: bamofo on May 18, 2021, 10:09:43 AM are you sure this is the original full file?
|