[/flash]Hi! First of all im a n00b at all.

I´m having problem with my precat Oxygen Sensor and i replaced every damned sensor in the car that are part of the injection system. But nothing helped. The DTC still throwing at me.
P0135 - O2 Sensor Heating Circut Failure. (ITs a new one from Bosch.)
Harnesses are all well. Heating and O2 Sensor keep giving signal. But i think they are now plausible.
So the last possibility could be the ECU that has a problem, in my eyes.
.
Is there any option for me to Flash the Immo-OFF with the NEFMoto ECU Flasher over OBD with the Blue K409 KKL Cable, for testing the spare ECU i bought a week ago?

Whats the easisest way to swap the ECU of my VW POLO 2001?
Can the VWTOOL help me with this problem of the IMMO?

I have tried to read the EEPROM for IMMO PIN with VAG-K-CAN COMMANDER

Could anyone tell if this was correct made?

The both files are attached.

thank you in advance

according to files there both immo 2 so if this is the case dont need immo off just use VCDS and adapt as per guide on RossTech

could i flash a "virgin" IMMO Flash file?

Sry if i didn´t understand the logic of the IMMO and the ECU´s. My Car is a Polo 6n2 2001. So IMMO3 should be used since 05/2000 afaik.