|
Title: VCDS aborts readiness test for SAI Post by: fknbzn on March 07, 2022, 11:54:16 AM Working with 1.8t AWM 4b0906018ch
Removed SAI pump and relay via ESKONF. Only SAI pump removed on car. Modified MSLUB to 0 Modified MSLBAS to all 0's When I force readiness check via Basic Settings it starts the test then after a minute or so it ABORTs. It has also gone to TEST OFF after a minute. Anybody seen this before or have a suggestion? See Pics below. Title: Re: VCDS aborts readiness test for SAI Post by: vwaudiguy on March 08, 2022, 05:25:28 PM Cycle the ign, and try again. Might take 3 or more tries before it gives up, and sets to passed. This is assuming your deletes are correct.
Title: Re: VCDS aborts readiness test for SAI Post by: doublerwest on March 29, 2022, 04:08:43 AM Working with 1.8t AWM 4b0906018ch Removed SAI pump and relay via ESKONF. Only SAI pump removed on car. Modified MSLUB to 0 Modified MSLBAS to all 0's When I force readiness check via Basic Settings it starts the test then after a minute or so it ABORTs. It has also gone to TEST OFF after a minute. Anybody seen this before or have a suggestion? See Pics below. I had to do srysls adjustment to get it to kick it into pass after all other adjustments.. For some reason you cant force the test you have to run it like normal ....I had several other mods to... make sure you block up that port so it dosnt leak air in!! LOL OOo you may also have to add eskonf back in to normal..Eskonf kicked my arse tryna fiqure that one out so I just went around it.. |