VCDS aborts readiness test for SAI

Pages: [1]

« previous next »

Author

Topic: VCDS aborts readiness test for SAI (Read 1706 times)

fknbzn

Newbie

Karma: +0/-0
Offline

Offline

Posts: 20

	VCDS aborts readiness test for SAI « on: March 07, 2022, 11:54:16 AM »

Working with 1.8t AWM 4b0906018ch

Removed SAI pump and relay via ESKONF. Only SAI pump removed on car.
Modified MSLUB to 0
Modified MSLBAS to all 0's

When I force readiness check via Basic Settings it starts the test then after a minute or so it ABORTs.
It has also gone to TEST OFF after a minute.

Anybody seen this before or have a suggestion?

See Pics below.


« Last Edit: March 07, 2022, 12:31:50 PM by fknbzn »	Logged

2001 A4TQM - Bolted

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: VCDS aborts readiness test for SAI « Reply #1 on: March 08, 2022, 05:25:28 PM »

Cycle the ign, and try again. Might take 3 or more tries before it gives up, and sets to passed. This is assuming your deletes are correct.


	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

doublerwest

Full Member

Karma: +5/-4
Offline

Offline

Posts: 178

	Re: VCDS aborts readiness test for SAI « Reply #2 on: March 29, 2022, 04:08:43 AM »

Quote from: fknbzn on March 07, 2022, 11:54:16 AM

I had to do srysls adjustment to get it to kick it into pass after all other adjustments.. For some reason you cant force the test you have to run it like normal ....I had several other mods to... make sure you block up that port so it dosnt leak air in!! LOL OOo you may also have to add eskonf back in to normal..Eskonf kicked my arse tryna fiqure that one out so I just went around it..


« Last Edit: March 29, 2022, 04:14:01 AM by doublerwest »	Logged

W357

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 01:52:24 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search