|
Title: CobraRTP Emulator problem Post by: soykii on September 02, 2023, 06:32:59 PM Hello Guys at first sorry for my English iam from Germany.
I have a CobraRTP Emulator i solderd the Adapter connected everything and put the Emulator into the Ecu only the Usb cable comes out from a small hole. After Flashing the Emulator i tried to start the Car but it have a bad idle and the throttlebody opens and close permanently (fast) and the engine dies. So i opened my ecu again and searched for faults but. After hours of trying i connected the ecu without the body into the csr and the Emulator next to the Ecu the csrs starts and run fine. When i take the Emulator and hold i near of the the ecu without touching anything the engine dies(in the position where its fixed) Now i dont now what to do i really dont want to leave the Emulator outside the Ecu because of water and dirt . I hope someone who habe expirience with Emulator can help me Best wishes Title: Re: CobraRTP Emulator problem Post by: Marder on February 07, 2024, 01:46:13 PM Hey,
Sorry for bad Englisch i am also from Germany ;D . Maybe it is because of the electromagnetic fields of the Emulator. I´ve heard about some guys that they had problems after putting a Thick cable near the ECU for ther Subwoofer. Maybe you have to try to put it in some kind of little box... or try to do it on a sunny day. I hope i could help you. :-* Title: Re: CobraRTP Emulator problem Post by: sda2 on February 14, 2024, 03:33:29 AM Since you havent enlighted us what ECU you are using, its difficult to help.
I run several CobraRTPs without any problems in Siemens MS4* series ECUs. Title: Re: CobraRTP Emulator problem Post by: James1 on February 14, 2024, 03:50:10 PM I've not seen this before, does it work with ME7?
Title: Re: CobraRTP Emulator problem Post by: prj on February 14, 2024, 04:03:33 PM I've not seen this before, does it work with ME7? Yes, it should.Title: Re: CobraRTP Emulator problem Post by: Dave9n3 on February 14, 2024, 04:07:56 PM I've not seen this before, does it work with ME7? Yeah it does, tracing also works. Need to put eeprom in test model and also sort NOROMCHECKRESET in flash to stop checksum issues whilst running I shoulda dd thats with a c167 me7.5 29f800bb Title: Re: CobraRTP Emulator problem Post by: be_strong on March 04, 2024, 06:24:47 AM Since you havent enlighted us what ECU you are using, its difficult to help. I run several CobraRTPs without any problems in Siemens MS4* series ECUs. Hello. How to connect tunerpro to the emulator. I can't find a tutorial explaining how to do it? Title: Re: CobraRTP Emulator problem Post by: be_strong on March 04, 2024, 11:51:24 AM Hello. How to connect tunerpro to the emulator. I can't find a tutorial explaining how to do it? Title: Re: CobraRTP Emulator problem Post by: Marder on March 08, 2024, 08:35:53 AM be_strong
Its on their website. Go to Support and then Manuals, Drivers, Software, files. (https://cobrartp.com/en/downloads/) On the right side are Manuals. Sorry for bad Englisch, I am from Germany. I hope i could help. ;D Title: Re: CobraRTP Emulator problem Post by: be_strong on May 13, 2024, 10:33:50 AM be_strong Its on their website. Go to Support and then Manuals, Drivers, Software, files. (https://cobrartp.com/en/downloads/) On the right side are Manuals. Sorry for bad Englisch, I am from Germany. I hope i could help. ;D Thanks |