|
Title: Code Out EVAP LEAK DETECTION PUMP Post by: skravo on May 28, 2013, 03:49:58 AM Hey, I'm from Australia and bought a US ecu as my old one got destroyed.
So I spent a few hours taking all of the wheel guards to finally think we probably dont have this pump in Australia. Does anyone know how to code it out of the ECU. 1 Fault Found: 17881 - EVAP Leak Detection Pump: Open Circuit P1473 - 35-00 - - I work in computers but have never done any of this before and want to tread carefully. Any help appreciated. Luke Title: Re: Code Out EVAP LEAK DETECTION PUMP Post by: vdubnation on May 28, 2013, 06:09:23 AM hey
check out the s4 tuning wiki you need to 0 all the required bytes. http://s4wiki.com/wiki/Tuning Title: Re: Code Out EVAP LEAK DETECTION PUMP Post by: ddillenger on May 28, 2013, 08:53:53 AM What ecu number?
Title: Re: Code Out EVAP LEAK DETECTION PUMP Post by: vdubnation on May 28, 2013, 09:09:06 AM i think he has a l box or something pertaining to a s4 i remember he wrote about his ecu being bad and he had stage 1.
Title: Re: Code Out EVAP LEAK DETECTION PUMP Post by: ddillenger on May 28, 2013, 09:17:11 AM If you give me the ecu number your car HAD, I can help you. If you don't have it, I can send you a file to try, but it may take a couple attempts to find the right bit.
Title: Re: Code Out EVAP LEAK DETECTION PUMP Post by: skravo on May 28, 2013, 04:26:03 PM My ECU is 4Z7 907 551 H and I have a K in there now.
Title: Re: Code Out EVAP LEAK DETECTION PUMP Post by: skravo on May 28, 2013, 04:27:24 PM By that I meant original was a H.
Title: Re: Code Out EVAP LEAK DETECTION PUMP Post by: ddillenger on May 28, 2013, 04:53:23 PM Do you have your original file? I have a 4Z7907551K file, but not an original H.
If you're interested in trying a few variations, I can definitely figure it out (2-3 tries maximum). Only one if you have the stock file. I was needing to determine the LDP bit pairs anyway. Title: Re: Code Out EVAP LEAK DETECTION PUMP Post by: skravo on May 28, 2013, 09:26:10 PM Unfortunately I don't have the original H. I thought I recalled some posts about codeing it out and didn't think it would matter between versions. I would send it to a tuning place, but Australia really has nothing which is disappointing. Are there any in the US you would recommend. I saw posts about VAST editing it out but apparently they are out of business?
Title: Re: Code Out EVAP LEAK DETECTION PUMP Post by: JG27 on January 19, 2017, 06:25:55 AM I would also like to code out EVAP system - N80 valve and Leak detection Pump on Audi A6 C5 2.7T (APB).
Never been using Nefmoto, but now I have cable and some boost problems according to LDP code in vag. Could someone help with this issue? I read that need to zero: CDLDP CDTES CLATEVE CLALDPE what about ESKONF Title: Re: Code Out EVAP LEAK DETECTION PUMP Post by: elRey on May 02, 2017, 07:55:23 AM On the 1.8t AWP boxes (032HS, LP, etc) there was no eskonf byte for LDP (that I could find). I had to just address it by zeroing DTC.
Title: Re: Code Out EVAP LEAK DETECTION PUMP Post by: ottosan on February 08, 2018, 12:13:53 PM Hello,
I have a similar story. After manual conversion and a manual software flash ECU says: 17881 - EVAP Leak Detection Pump: Open Circuit P1473 - 35-00 on 1.8t AUQ, ME 7.5. It would be nice if somebody could tell me how to code out leak detection pump or disable DTC. Thank you in Advance, Title: Re: Code Out EVAP LEAK DETECTION PUMP Post by: vwaudiguy on February 08, 2018, 03:40:42 PM Hello, I have a similar story. After manual conversion and a manual software flash ECU says: 17881 - EVAP Leak Detection Pump: Open Circuit P1473 - 35-00 on 1.8t AUQ, ME 7.5. It would be nice if somebody could tell me how to code out leak detection pump or disable DTC. Thank you in Advance, Read the Wiki, and look for ESKONF. Title: Re: Code Out EVAP LEAK DETECTION PUMP Post by: jimmcgee5 on February 08, 2018, 06:06:30 PM Read the Wiki, and look for ESKONF. and whats that going to do ? , http://nefariousmotorsports.com/forum/index.php?topic=13333.0title= |