Pages: [1]
Author Topic: Code Out EVAP LEAK DETECTION PUMP  (Read 15084 times)
skravo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« on: May 28, 2013, 03:49:58 AM »

Hey, I'm from Australia and bought a US ecu as my old one got destroyed.

So I spent a few hours taking all of the wheel guards to finally think we probably dont have this pump in Australia.

Does anyone know how to code it out of the ECU.

1 Fault Found:
17881 - EVAP Leak Detection Pump: Open Circuit
        P1473 - 35-00 - -

I work in computers but have never done any of this before and want to tread carefully.

Any help appreciated.

Luke
Logged
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433


« Reply #1 on: May 28, 2013, 06:09:23 AM »

hey

check out the s4 tuning wiki you need to 0 all the required bytes.

http://s4wiki.com/wiki/Tuning
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #2 on: May 28, 2013, 08:53:53 AM »

What ecu number?
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433


« Reply #3 on: May 28, 2013, 09:09:06 AM »

i think he has a l box or something pertaining to a s4 i remember he wrote about his ecu being bad and he had stage 1.
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #4 on: May 28, 2013, 09:17:11 AM »

If you give me the ecu number your car HAD, I can help you. If you don't have it, I can send you a file to try, but it may take a couple attempts to find the right bit.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
skravo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #5 on: May 28, 2013, 04:26:03 PM »

My ECU is 4Z7 907 551 H and I have a K in there now.
Logged
skravo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #6 on: May 28, 2013, 04:27:24 PM »

By that I meant original was a H.
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #7 on: May 28, 2013, 04:53:23 PM »

Do you have your original file? I have a 4Z7907551K file, but not an original H.

If you're interested in trying a few variations, I can definitely figure it out (2-3 tries maximum). Only one if you have the stock file. I was needing to determine the LDP bit pairs anyway.
« Last Edit: May 28, 2013, 05:04:31 PM by ddillenger » Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
skravo
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 10


« Reply #8 on: May 28, 2013, 09:26:10 PM »

Unfortunately I don't have the original H. I thought I recalled some posts about codeing it out and didn't think it would matter between versions. I would send it to a tuning place, but Australia really has nothing which is disappointing. Are there any in the US you would recommend. I saw posts about VAST editing it out but apparently they are out of business?
Logged
JG27
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #9 on: January 19, 2017, 06:25:55 AM »

I would also like to code out EVAP system - N80 valve and Leak detection Pump on Audi A6 C5 2.7T (APB).
Never been using Nefmoto, but now I have cable and some boost problems according to LDP code in vag.
Could someone help with this issue?

I read that need to zero:
CDLDP
CDTES
CLATEVE
CLALDPE

what about ESKONF
Logged
elRey
Hero Member
*****

Karma: +31/-1
Offline Offline

Posts: 565


« Reply #10 on: May 02, 2017, 07:55:23 AM »

On the 1.8t AWP boxes (032HS, LP, etc) there was no eskonf byte for LDP (that I could find).  I had to just address it by zeroing DTC.
Logged
ottosan
Full Member
***

Karma: +5/-5
Offline Offline

Posts: 91


« Reply #11 on: February 08, 2018, 12:13:53 PM »

Hello,

I have a similar story.
After manual conversion and a manual software flash ECU says:

17881 - EVAP Leak Detection Pump: Open Circuit
        P1473 - 35-00

on 1.8t AUQ, ME 7.5.
It would be nice if somebody could tell me how to code out leak detection pump or disable DTC.

Thank you in Advance,



Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #12 on: February 08, 2018, 03:40:42 PM »

Hello,

I have a similar story.
After manual conversion and a manual software flash ECU says:

17881 - EVAP Leak Detection Pump: Open Circuit
        P1473 - 35-00

on 1.8t AUQ, ME 7.5.
It would be nice if somebody could tell me how to code out leak detection pump or disable DTC.

Thank you in Advance,

Read the Wiki, and look for ESKONF.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
jimmcgee5
Full Member
***

Karma: +7/-7
Offline Offline

Posts: 201


« Reply #13 on: February 08, 2018, 06:06:30 PM »

Read the Wiki, and look for ESKONF.

and whats that going to do ? , http://nefariousmotorsports.com/forum/index.php?topic=13333.0title=
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.209 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)