|
Title: Bad Flash Memory? Post by: dstamatoiu on August 25, 2013, 08:01:48 PM Hi, I been trying to figure out if my flash memory is bad.. I been having issue trying to connect using NefoMoto tool. I try to read the ecu and I get this:
Quote Validated FTDI device is in dumb mode. Disconnected Connecting... Starting slow init connection. Connecting to address 0x01. Slow init succeeded. Switching to KWP2000 session. Connected Disabling Windows sleep mode. Reading ECU flash memory. ECU reports programming session preconditions have been met. Negotiating communication timings. Successfully changed to new communication timings. Requesting security access. Security access granted. Starting diagnostic session. Disconnecting because no response was received for the Tester Present message. Disconnected Reading ECU flash memory failed. 100% complete. Restoring Windows sleep mode. This is the ecu info: Quote 0x92, System Supplier ECU Hardware Number: 0261207939 0x94, System Supplier ECU Software Number: 1037366446 0x91, Vehicle Manufacturer ECU Hardware Number: 0x0D, , 0xFF 0x9B, Calibration Date: 8E0909518AF , 0002, 0x03003E81, 0x00001300, 0x00D2, 1.8L R4/5VT , G02 0x9C, Calibration Equiment Software Number: 0x00000000 Title: Re: Bad Flash Memory? Post by: nyet on August 25, 2013, 08:14:49 PM Is it a stock ecu?
Title: Re: Bad Flash Memory? Post by: dstamatoiu on August 25, 2013, 08:17:08 PM Is it a stock ecu? Yes, the only thing I did was turn off the immo. Title: Re: Bad Flash Memory? Post by: ddillenger on August 25, 2013, 08:21:20 PM I have had 0 luck getting nefmoto to read or write a 518AF, although I know others have. My errors have been the exact same as yours.
Bootmode write it with galletto, or use MPPS. Works every time. Title: Re: Bad Flash Memory? Post by: dstamatoiu on August 25, 2013, 08:29:13 PM I have had 0 luck getting nefmoto to read or write a 518AF, although I know others have. My errors have been the exact same as yours. Bootmode write it with galletto, or use MPPS. Works every time. Thank you again Ddillenger! My cable is on order. I will update when I get it. Time to wait. |