|
Title: Me7.5 immo defeat without boot mode trough obd Post by: volksdude on October 01, 2013, 05:01:12 AM Ok here's my problem. Got a 2.0 turbo ME7.5 ecu here from a "big tuner " wich I need to immo defeat. However I had the bad surprise of finding goop on all chips on the board. ( I kind of understand why there is goop on chips where I could syphon the flash but on the 95040?? Really?? Whats the point? )
So I'm wondering if there's a way to immo defeat that damn ecu trough OBD without sending it in boot mode. Or if there is a pin on ecu connector that can send the ecu in biot mode so I can use the program available here to immo defeat it... Or in last resort a way to remove the goop without damaging the chip. Title: Re: Me7.5 immo defeat without boot mode trough obd Post by: maZer.GTi on October 01, 2013, 05:17:06 AM You can use a tool like VAG Commander, or Vagdashcom/Vagdashcan.
This tool not require boot mode. Title: Re: Me7.5 immo defeat without boot mode trough obd Post by: hammersword on October 01, 2013, 05:27:06 AM I use VAG ECU tool
Title: Re: Me7.5 immo defeat without boot mode trough obd Post by: Carsinc on October 01, 2013, 06:19:46 PM Depending on what big tuner this may not work anyhow.
I know GAIC has a really weird 95040 file. Title: Re: Me7.5 immo defeat without boot mode trough obd Post by: TCSTigersClaw on October 02, 2013, 01:21:42 AM You mean GIAC ? APR and Revo too...
to OP , what is this 2.0 Turbo with ME7.5 ?!?!? Title: Re: Re: Re: Me7.5 immo defeat without boot mode trough obd Post by: volksdude on October 02, 2013, 06:00:01 AM You mean GIAC ? APR and Revo too... to OP , what is this 2.0 Turbo with ME7.5 ?!?!? 2.0 8v. I managed to find an alternative onnthe board to ground the pin for bootmode. As for the file I just flashed the immo off file to avoid hassles Title: Re: Me7.5 immo defeat without boot mode trough obd Post by: f1torrents on October 02, 2013, 04:26:19 PM I have tried to immo off a GIAC ecu with VagDashCan and it wouldn't save it to the 95040.
The 95040 was pretty standard at least in terms of the immo off locations. But I could not get it to save and being ME7.1.1 I couldn't get it into boot mode. I have lots of trouble with those and boot mode. Title: Re: Me7.5 immo defeat without boot mode trough obd Post by: ddillenger on October 02, 2013, 04:32:30 PM f1torrents:
I gave up on doing those without a hot air station. Title: Re: Me7.5 immo defeat without boot mode trough obd Post by: coreyj03 on October 03, 2013, 06:55:13 PM giac's (and others) tunes are tied to the 95040 contents. you must dump the original 95040 contents and manually change the 2 hex values and checksums while leaving the rest stock and reflashing it.
Title: Re: Re: Re: Me7.5 immo defeat without boot mode trough obd Post by: volksdude on October 04, 2013, 08:11:07 AM giac's (and others) tunes are tied to the 95040 contents. you must dump the original 95040 contents and manually change the 2 hex values and checksums while leaving the rest stock and reflashing it. Well if thats the case I'll have a look at the original bin i read before flashing the immo off file. On another note, can someone explain me why they gooped the 95040 ?? Is there any vital info to get from there? ( other than what you just explained about the immo file tied to the flash ) Title: Re: Me7.5 immo defeat without boot mode trough obd Post by: f1torrents on October 04, 2013, 09:35:39 AM That's the exact reason.
So you can't IMMO off it easily and take it to another car. You must use the original 95040 to retain the tune. |