|
Title: What Vag Commander ?? Post by: Tune Me Up on November 08, 2013, 02:02:22 PM Hi guys
My car has a 2001 bosch me7.5 ECU. I need to replace it so I'm going to also need to sync or defeat the immobiliser in the new one. Someone said that i can use the cheap vag commander cable to do this but I'm not sure what one i should get. Should i get the version 1.4 or 5.1? Also can you use the any cable with any version? For example could i buy a version 5.1 cable and use it with 1.4, or buy a version 1.4 cable and use it with 2.5. Thanks ;) Title: Re: What Vag Commander ?? Post by: MK2-VRT on November 09, 2013, 11:00:00 AM Blue vagcom cable + 1.4 works, but not with every 1.8T ecu..For immo off, desolder the eeprom and write them with programmer, over obd it dont work.
Title: Re: What Vag Commander ?? Post by: Tune Me Up on November 09, 2013, 06:48:51 PM Thanks for the reply.
Do you mean a cable like this one: http://www.ebay.co.uk/itm/VAG-GROUP-KKL-OBD-2-II-USB-DIAGNOSTIC-CABLE-VW-AUDI-SEAT-SKODA-COM-ES-DRIVER-/140961359710?pt=UK_Diagnostic_Tools_Equipment&hash=item20d1f3a75e As i thought it had to a vag k+can cable like this one: http://www.ebay.co.uk/itm/VAG-K-CAN-Commander-Full-1-4-Diagnostic-Scanner-Audi-VW-Skoda-Seat-OBD2-EOBD-UK-/141061756925?pt=UK_Diagnostic_Tools_Equipment&hash=item20d7ef97fd From the bit of research ive done it seems that as my one is a 2001 then i should be able to do everything through the obd port. What cable would i need for vag commander 2.5 ? Title: Re: What Vag Commander ?? Post by: eliotroyano on November 09, 2013, 08:12:40 PM Blue vagcom cable + 1.4 works, but not with every 1.8T ecu..For immo off, desolder the eeprom and write them with programmer, over obd it dont work. I think that around here in Nefmoto is a Vag Commander V2.5 that works with KKL standard interface. Title: Re: What Vag Commander ?? Post by: Chris01 on November 23, 2013, 05:49:51 PM ... What cable would i need for vag commander 2.5 ? My FTDI FT232R cable works fine with vag commander 2.5. I couldn't get it to work with version 3.6 in Win 7 x64. The original bundle was with vag-commander 5.1 though, but that version was good for nothing. No read/write immo functions. Thats the bundle i got, but i'm sure there are more that will work for you. http://www.ebay.co.uk/itm/281161212017 |