|
Title: TT 8N 225 APX engine - read/flash 29F400BT Chip via OBD Post by: Dimitri on March 31, 2014, 12:05:21 PM Hello,
my name is Dimitri, I'm from Germany (Heilbronn) I have TT 225 with an APX engine. ECU chip is 29F400BT I have no success at ECU with Galletto read via OBD... can someone tell me how I can proceed with 29F400BT and Galleto thank very much for any help Title: Re: TT 8N 225 APX engine - read/flash 29F400BT Chip via OBD Post by: maZer.GTi on March 31, 2014, 03:13:40 PM Hello, my name is Dimitri, I'm from Germany (Heilbronn) I have TT 225 with an APX engine. ECU chip is 29F400BT I have no success at ECU with Galletto read via OBD... can someone tell me how I can proceed with 29F400BT and Galleto thank very much for any help Im not sure but galletto cant read me7 outside bootmode. Try to use me7flasher with your galletto cable. You need to remove the cluster fuse before read or write. Title: Re: TT 8N 225 APX engine - read/flash 29F400BT Chip via OBD Post by: TCSTigersClaw on April 01, 2014, 09:16:00 AM Hello, my name is Dimitri, I'm from Germany (Heilbronn) I have TT 225 with an APX engine. ECU chip is 29F400BT I have no success at ECU with Galletto read via OBD... can someone tell me how I can proceed with 29F400BT and Galleto thank very much for any help Use a cheap Blue ebay Vag com cable, Download the Nefmoto software . Chose from Devices your Serial-->USB cable , then go to KWP2000 flashing , Choose memory layout "29F400" , then press Full read Flash. Removing the cluster fuse is a good idea if you still have problems. Title: Re: TT 8N 225 APX engine - read/flash 29F400BT Chip via OBD Post by: littco on April 01, 2014, 02:35:26 PM Im not sure but galletto cant read me7 outside bootmode. Try to use me7flasher with your galletto cable. You need to remove the cluster fuse before read or write. Not true.. Galletto works fine via obd on most me7 ecus I have had issues though with the apx Ecu and galletto but mpps (clone or not) worked fine Title: Re: TT 8N 225 APX engine - read/flash 29F400BT Chip via OBD Post by: Dimitri on April 02, 2014, 03:45:52 PM hello, thank you all for your help. I have made some success with blue cable.... but I have not full success with Reading what is meant - cluster fuse removing? control unit fuse put out and turn the key @littcos MPPS works definitely with APX? thank very much for help! Title: Re: TT 8N 225 APX engine - read/flash 29F400BT Chip via OBD Post by: TCSTigersClaw on April 02, 2014, 11:49:56 PM Open the fuse box inside the cabin You can see the panel when you open the driver`s door.
Remove the plastic ,search for the Cluster fuse.Usually there are 2 fuses ,since you are not sure which fuse , remove them both. If still is a no go ( I had as similar expirience with a BAM TT , couldn`t read it no matter what ) you have to BOOT your ECU,search the wikis and you will find info Title: Re: TT 8N 225 APX engine - read/flash 29F400BT Chip via OBD Post by: Dimitri on April 03, 2014, 03:50:27 AM Thanks,
I've watched are three fuses for the control unit. was uncertain . will try in the evening today Title: Re: TT 8N 225 APX engine - read/flash 29F400BT Chip via OBD Post by: Dimitri on April 03, 2014, 07:18:04 PM I ve long time tried today. :(
have 4 fuse for the motor control unit. ale fuses plugged out, 1 -, 2 -, 3 plugged in and at in different combinations... - no chance anyone have an idea what can i do? should I buy a MPPS-flasher and rehearse with them? Thanks for any help Title: Re: TT 8N 225 APX engine - read/flash 29F400BT Chip via OBD Post by: TheDSI on April 04, 2014, 01:20:18 AM remove the fuse for the dashbord .
mpps works perfectly with those 29F400 ECU . Title: Re: TT 8N 225 APX engine - read/flash 29F400BT Chip via OBD Post by: Dimitri on April 09, 2014, 08:40:50 PM Hello
I am very happy! I have read my TT 8N APX ECU! I have tasted 4 hours long yesterday with my new MPPSv13 cable. cable has not worked. fuse for Dashboard put out - no go fuse put in - no go fuse control unit (there are 4 pieces) put out - no go important for all who want to read the APX ECU: Read the ECU works only with a cable MPPS - fuse for Dashboard put out (only this one) - Turn on key - listening that the petrol pump does not run - fuse plug in Reading works! Thank all for help ! my file is here atatched according to my previous owners this is tuned of 265 hp 1.3 bar boost pressure (with my Iphone-DashCmd I have 250hp measured) somebody please a XDF for me the published here are not for APX ECU from 1999 Thank very much one more question - MPPS program corrects the checksum correct? Title: Re: TT 8N 225 APX engine - read/flash 29F400BT Chip via OBD Post by: Dimitri on April 15, 2014, 03:57:22 AM Hello
nobody can help me with XDF for ME7 for a APX engine ECU = 8N0906018AE pliase......... I can not use WinOLS - no license.......... :( |