NefMoto > Technical > Tuning > TT 8N 225 APX engine - read/flash 29F400BT Chip via OBD
Pages: [1]
« previous next »
Author Topic: TT 8N 225 APX engine - read/flash 29F400BT Chip via OBD  (Read 7920 times)
Dimitri
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6
« on: March 31, 2014, 12:05:21 PM »
Hello,
my name is Dimitri,
I'm from Germany (Heilbronn)

I have TT 225 with an APX engine. ECU chip is 29F400BT
I have no success at ECU with Galletto read via OBD...

can someone tell me how I can proceed with 29F400BT and Galleto

thank very much for any help
Logged
maZer.GTi
Full Member
***

Karma: +68/-6
Offline Offline

Posts: 246
« Reply #1 on: March 31, 2014, 03:13:40 PM »
Quote from: Dimitri on March 31, 2014, 12:05:21 PM
Hello,
my name is Dimitri,
I'm from Germany (Heilbronn)

I have TT 225 with an APX engine. ECU chip is 29F400BT
I have no success at ECU with Galletto read via OBD...

can someone tell me how I can proceed with 29F400BT and Galleto

thank very much for any help

Im not sure but galletto cant read me7 outside bootmode.
Try to use me7flasher with your galletto cable.
You need to remove the cluster fuse before read or write.
Logged
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353
« Reply #2 on: April 01, 2014, 09:16:00 AM »
Quote from: Dimitri on March 31, 2014, 12:05:21 PM
Hello,
my name is Dimitri,
I'm from Germany (Heilbronn)

I have TT 225 with an APX engine. ECU chip is 29F400BT
I have no success at ECU with Galletto read via OBD...

can someone tell me how I can proceed with 29F400BT and Galleto

thank very much for any help

Use a cheap Blue ebay Vag com cable, Download the Nefmoto software . Chose from Devices your Serial-->USB cable , then go to KWP2000 flashing , Choose memory layout "29F400" , then press Full read Flash.

Removing the cluster fuse is a good idea if you still have problems.
Logged
VAG cars newbie tuner Smiley
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903
« Reply #3 on: April 01, 2014, 02:35:26 PM »
Quote from: maZer.GTi on March 31, 2014, 03:13:40 PM
Im not sure but galletto cant read me7 outside bootmode.
Try to use me7flasher with your galletto cable.
You need to remove the cluster fuse before read or write.

Not true.. Galletto works fine via obd on most me7 ecus

I have had issues though with the apx Ecu and galletto but mpps (clone or not) worked fine
Logged
Dimitri
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6
« Reply #4 on: April 02, 2014, 03:45:52 PM »

hello,

thank you all for your help.

I have made ​​some success with blue cable....
but I have not full success with Reading

what is meant - cluster fuse removing?
control unit fuse put out and turn the key 

@littcos
MPPS works definitely with APX?

thank very much for help!
Logged
TCSTigersClaw
Sr. Member
****

Karma: +15/-6
Offline Offline

Posts: 353
« Reply #5 on: April 02, 2014, 11:49:56 PM »
Open the fuse box inside the cabin You can see the panel when you open the driver`s door.
Remove the plastic ,search for the Cluster fuse.Usually there are 2 fuses ,since you are not sure which fuse ,
remove them both.

If still is a no go ( I had as similar expirience with a BAM TT , couldn`t read it no matter what ) you have to BOOT your ECU,search the wikis and you will find info
Logged
VAG cars newbie tuner Smiley
Dimitri
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6
« Reply #6 on: April 03, 2014, 03:50:27 AM »
Thanks,

I've watched  are three fuses for the control unit. was uncertain .

will try in the evening today
Logged
Dimitri
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6
« Reply #7 on: April 03, 2014, 07:18:04 PM »
I ve long time tried today.  Sad

have 4 fuse for the motor control unit. ale fuses plugged out, 1 -, 2 -, 3 plugged in and at in different combinations...
 - no chance

anyone have an idea what can i do?
should I buy a MPPS-flasher and rehearse with them?

Thanks for any help
Logged
TheDSI
Full Member
***

Karma: +12/-0
Offline Offline

Posts: 78
« Reply #8 on: April 04, 2014, 01:20:18 AM »
remove the fuse for the dashbord .
mpps works perfectly with those 29F400 ECU .
Logged
Dimitri
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6
« Reply #9 on: April 09, 2014, 08:40:50 PM »
Hello

I am very happy! I have read my TT 8N APX ECU!

I have tasted 4 hours long yesterday with my new MPPSv13 cable.
cable has not worked.
fuse for Dashboard put out - no go
fuse put in - no go
fuse control unit (there are 4 pieces) put out - no go

important for all who want to read the APX ECU:
Read the ECU works only with a cable MPPS
- fuse for Dashboard put out (only this one)
- Turn on key
- listening that the petrol pump does not run
- fuse plug in
Reading works!

Thank all for help !

my file is here atatched
according to my previous owners this is tuned of 265 hp
1.3 bar boost pressure
(with my Iphone-DashCmd I have 250hp measured)


somebody please a XDF for me
the published here are not for APX ECU from 1999

Thank very much

one more question - MPPS program corrects the checksum correct?
« Last Edit: April 09, 2014, 08:43:28 PM by Dimitri » Logged
Dimitri
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6
« Reply #10 on: April 15, 2014, 03:57:22 AM »
Hello

nobody can help me with XDF for ME7 for a APX engine

ECU = 8N0906018AE

pliase.........


I can not use WinOLS - no license.......... Sad
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 14, 2024, 07:23:46 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.035 seconds with 16 queries. (Pretty URLs adds 0s, 0q)