|
Title: MED9 +rs4 iny+low fuel pum RS3 = car stop Post by: javigsi on April 20, 2014, 09:12:57 AM Hi guys . I have a problem with 2.0TFSi. I have put the gt2871, iny rs4 , hfp autotech and lfp from audi rs3. The problem appears when we circulate very strong with the car, 2a,3a,4a gear to maximum power ....the car is stop .i think the problem is for low fuel pump rs3 , but why ? will this happen to any can help me. Thanks in advance
Title: Re: MED9 +rs4 iny+low fuel pum RS3 = car stop Post by: chlippo on April 20, 2014, 06:30:36 PM What do you mean by "stop"?
Does it shut down or struggles? If you have an AFR gauge you would be able to know if the pump is not doing ok. Or you can do some logs with vcds see what's happening Title: Re: MED9 +rs4 iny+low fuel pum RS3 = car stop Post by: javigsi on April 21, 2014, 07:09:58 AM the engine stops. and he make P310B error in vag com.
here log Title: Re: MED9 +rs4 iny+low fuel pum RS3 = car stop Post by: Beaviz on April 22, 2014, 12:24:12 AM According to the log it could look like the low pressure pump are struggeling to keep up. The Rosstech wiki also indicates this:
http://wiki.ross-tech.com/wiki/index.php/P310B/012555 Have you calibrated the HPFP correct in the software? I do not think this is the problem, but this could maybe fix the differences between requested and actual in the lower RPM where the LPFP seems to do fine. Title: Re: MED9 +rs4 iny+low fuel pum RS3 = car stop Post by: DigiFather on April 23, 2014, 12:21:49 AM modules overheat and turn off, then error happen because presure is lower than specified.
Title: Re: MED9 +rs4 iny+low fuel pum RS3 = car stop Post by: javigsi on April 23, 2014, 07:19:22 AM ok thanks !
Title: Re: MED9 +rs4 iny+low fuel pum RS3 = car stop Post by: DigiFather on April 25, 2014, 12:06:34 PM ok thanks ! I install rs3 module and it help but required some mods with cables . |