MED9 +rs4 iny+low fuel pum RS3 = car stop

Pages: [1]

« previous next »

Author

Topic: MED9 +rs4 iny+low fuel pum RS3 = car stop (Read 5093 times)

javigsi

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 37

	MED9 +rs4 iny+low fuel pum RS3 = car stop « on: April 20, 2014, 09:12:57 AM »

Hi guys . I have a problem with 2.0TFSi. I have put the gt2871, iny rs4 , hfp autotech and lfp from audi rs3. The problem appears when we circulate very strong with the car, 2a,3a,4a gear to maximum power ....the car is stop .i think the problem is for low fuel pump rs3 , but why ? will this happen to any can help me. Thanks in advance


	Logged

chlippo

Newbie

Karma: +0/-0
Offline

Offline

Posts: 22

	Re: MED9 +rs4 iny+low fuel pum RS3 = car stop « Reply #1 on: April 20, 2014, 06:30:36 PM »

What do you mean by "stop"?

Does it shut down or struggles?
If you have an AFR gauge you would be able to know if the pump is not doing ok.
Or you can do some logs with vcds see what's happening


	Logged

javigsi

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 37

	Re: MED9 +rs4 iny+low fuel pum RS3 = car stop « Reply #2 on: April 21, 2014, 07:09:58 AM »

the engine stops. and he make P310B error in vag com.
here log


	Logged

Beaviz

Full Member

Karma: +8/-4
Offline

Offline

Posts: 190

	Re: MED9 +rs4 iny+low fuel pum RS3 = car stop « Reply #3 on: April 22, 2014, 12:24:12 AM »

According to the log it could look like the low pressure pump are struggeling to keep up. The Rosstech wiki also indicates this:
http://wiki.ross-tech.com/wiki/index.php/P310B/012555

Have you calibrated the HPFP correct in the software? I do not think this is the problem, but this could maybe fix the differences between requested and actual in the lower RPM where the LPFP seems to do fine.


	Logged

DigiFather

Newbie

Karma: +2/-0
Offline

Offline

Posts: 11

	Re: MED9 +rs4 iny+low fuel pum RS3 = car stop « Reply #4 on: April 23, 2014, 12:21:49 AM »

modules overheat and turn off, then error happen because presure is lower than specified.


	Logged

javigsi

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 37

	Re: MED9 +rs4 iny+low fuel pum RS3 = car stop « Reply #5 on: April 23, 2014, 07:19:22 AM »

ok thanks !


	Logged

DigiFather

Newbie

Karma: +2/-0
Offline

Offline

Posts: 11

	Re: MED9 +rs4 iny+low fuel pum RS3 = car stop « Reply #6 on: April 25, 2014, 12:06:34 PM »

Quote from: javigsi on April 23, 2014, 07:19:22 AM

ok thanks !

I install rs3 module and it help but required some mods with cables .


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 10:28:29 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search