|
Title: Help address Map sensor limiter Med 9.1 Post by: emma on May 14, 2014, 12:35:21 PM Hello to all
I need to figure out if the sensor Map of my car has arrived at full scale because after several tests I can not come up with the turbo pressure more than 2.1 bar someone i can tell the address of the maps of the Map and if anyone knows what modificxare over you limitatoti pressure and load, torque, etc.? Map file ori: Title: Re: Help address Map sensor limiter Med 9.1 Post by: fredrik_a on May 14, 2014, 09:11:24 PM I can not come up with the turbo pressure more than 2.1 bar Are you really running 2.1 bars of boost (3.1 absolute)? Title: Re: Help address Map sensor limiter Med 9.1 Post by: emma on May 14, 2014, 10:11:25 PM Are you really running 2.1 bars of boost (3.1 absolute)? Tanks fredrik_aBut my car has 2.1bar absolute,1.1 bar of boost Title: Re: Re: Help address Map sensor limiter Med 9.1 Post by: technic on May 15, 2014, 12:50:21 AM Your problem is not related to diag limiter. It's limited by sensor to 2550mBar (at least).
Title: Re: Help address Map sensor limiter Med 9.1 Post by: terminator on May 15, 2014, 01:33:09 AM Probably you missed LDPBN
Title: Re: Help address Map sensor limiter Med 9.1 Post by: emma on May 15, 2014, 01:44:47 AM Probably you missed LDPBN thanks for the reply but LDPBN it was increased to 2500 I am attaching the modified file so that you can control it This file is one of many files tested but without result |