|
Title: WinOLS / Tunerpro issue's and XDF request Post by: Allabout on August 09, 2014, 02:22:01 AM Not sure if this is the correct forum topic ot be in,
So If mod's feel it needs to be moved?? Please do so. Right now, I'm struggling myself to be able to read the HEX correctly. A few applications where suggested with no luck I'm afraid. Tuner Pro - Not able to be used, As I don't have an XDF file. I did look in here http://nefariousmotorsports.com/forum/index.php?board=17.0 I realize I'm still very much a beginner in tuning directly. So I would like to be able to understand all this information more clearly. If anyone has any suggestions, information or help. That would be appreciated. Title: Re: WinOLS / Tunerpro issue's and XDF request Post by: armageddon on August 09, 2014, 05:46:54 AM Your is a 551D right?
You have over here 2 xdf's http://nefariousmotorsports.com/forum/index.php?topic=430.0 http://nefariousmotorsports.com/forum/index.php?topic=1976.0 Title: Re: WinOLS / Tunerpro issue's and XDF request Post by: nyet on August 09, 2014, 10:34:06 AM Please make an attempt to learn the forum layout :P
Title: Re: WinOLS / Tunerpro issue's and XDF request Post by: Allabout on August 09, 2014, 05:21:40 PM Your is a 551D right? You have over here 2 xdf's http://nefariousmotorsports.com/forum/index.php?topic=430.0 http://nefariousmotorsports.com/forum/index.php?topic=1976.0 Thanks, I used the search function and never found any results. Even using Google resulted no info. So thanks Please make an attempt to learn the forum layout :P Honestly, I'm trying to. Was just not sure if the XDF and use of application would fall under tuning as such or not. Title: Re: WinOLS / Tunerpro issue's and XDF request Post by: nyet on August 09, 2014, 05:42:09 PM There is no reason to stay with the D box.
Title: Re: WinOLS / Tunerpro issue's and XDF request Post by: Allabout on August 09, 2014, 07:27:35 PM There is no reason to stay with the D box. Thanks, Then I would need to change the MAF table to associate with the Bosch unit? Otherwise, I need to replace the MAF with Hitachi unit? Title: Re: WinOLS / Tunerpro issue's and XDF request Post by: armageddon on August 10, 2014, 06:23:42 AM You could do both,
you can repalce your maf, or change MLOFS KFKHFM MLHFM to bosch values (MLHFM is bad define in 8D0907551D_2012-09-13.xdf, use 8d0907551D_publish.xdf) Title: Re: WinOLS / Tunerpro issue's and XDF request Post by: Allabout on August 10, 2014, 06:58:33 PM You could do both, you can repalce your maf, or change MLOFS KFKHFM MLHFM to bosch values (MLHFM is bad define in 8D0907551D_2012-09-13.xdf, use 8d0907551D_publish.xdf) If I'm flashing stock file on of course. However, once I know what the "tuned value's" would become? Only then I feel I would transfer information over. |