NefMoto

Ok, so I've been trying to tune to the best of my abilities. But I've gotten to the point where I'm using a L-box of NVR's 2++.

I have changed some settings and removed dtc's I needed too. I have removed emission stuff and just added w/m injection. But I'm not able to do what I really want and play with more adjustment for more HP and smoother operation. I'd prefer to log and flash the files and I'm willing to pay.

What I have already done, is my basic L-BOX setup for my needs but stock. It's a 2000 A6 2.7T, so I'm using the S4 551 L-Box. All the evap stuff and wha tnot codes are removed. SAI removed already, rear o2's removed, left foot braking, and changes for the Red 2.0T coils and also converted to Hitachi, but I can rewire my Bosch back in.

I plan on going with a whole stage 3 kit in about a year when I have the money for it. So I really just want something that maxes out k03's and my other mods.

So I can provide the base L-box file setup for my cars hardware configuration. Then someone custom tune the files. I can log and what not. Flash it.

So if someone can help me, please PM me so we can figure out a plan and cost.


Car Info

2000 A6 2.7T
145k  (all new timing hardware other recommendations done)
Forged DV's
S4 Intake Manifold
Cleaned Throttle Body
NEW Stock TBB
NGK 7 plugs @ .028
Boost leak tested system is solid
ICM Delete and Red 2.0T coil swap (ecu changes for dwell changed)
Hitachi MAF - Was Bosch Factory (ecu changes made as well)
2 New Upstream o2 sensors
Open Elements Air Filter to a stock airbox that's feeding filter air (pic below)
[
Snow Performance Stage 2 w/m kit 50/50 mix
- 220psi pump dual nozzles 225ml each progressive injection start 6psi and 100% @ 15psi are the lowest settings it's VC-100 controller.
XSPOWER SMIC's with stock scoops still
XSPOWER 3" V-Band Flex Cat-less Tiptonic Downpipes
-Stock all the way to the back, I removed mufflers. I plan to finish exhaust this week with two
MagnaFlow 10415 or 10416's but Lee at FTG said they will have a cat-back next week for sale. So I may wait to see what that's like so I have a nice solid exhaust not some backyard garage setup.

Daz Stage 1 TIP-CHIP
New Transmission fluid filter and TC.

I have ME7LOGGER setup with Neyts recommend parameters he likes to log. So I'd like to take full advantages of my w/m injection and 93 octane. I have tried and I'm not good at dialing these types of cars in.


I mean I'm offer money. Will someone who's knowledgeable be willing to help? I try to do my best I just lack the ability 100%


Thanks Guys.
LmK

If you already have a DAZ stage 1 tune ,  why don`t you ask Daz to make you a new file , the guy is great  8)

Audi man do you have any logs. ....i have a hard time finding good tip logs to compare too . If so can post the csv tia

Also tigersclaw i think he just has tip tune from daz

I can post logs of my NVR tune. And yes I have a tip chip tune from Daz.

Why don't you just post up some logs and the collective can give some advice on making it better yourself?

The NVR file as a base for a tip car is never going to feel right. Post what you want to change about it or what drivability you want to have. I hate to see a guy like you that has learned so much just give up.

Guys I am sorry for my ignorance , what is a "Tip" tune ..is it something US only ? I cant understand ??? ???

Posting some logs would indeed help :)

It's a tiptronic transmission :/

Yes logs are great

Ok, here are the logs and files.

File posted is Tune used in all 3 logs. i also attached my stock setup file that has all the things coded out and the stuff like 2.OT coils.

Log 1 before meth
Logs 2 and 3 after meth install

I will do it. You can guinea pig a few things for me in exchange. Email me.

audiman what exactly did you do for coil conversion (dwell time) ive read a few things and i keep getting print pages....i did the coil conversion as well and want to do this ......or just point me to thread

When I get home I will send you excel spreadsheet you can use if ur values match up and just copy and paste the settings over.

Would you like to email me your file and I will make the changes and then you can compare them in the difference tool in tunerpro.

here its the file ive been working for the community stage 1 tune .....just got my car back so will be posting more logs soon with a little more boost

Ok, I'm going to see Hunger Games with my wife. When I get home like 11pm or so I will do the changes and post the file back up for you. I'll see if I can do it here quick b4 I leave for the Movie Theater.

no rush dude go have fun......oh an double d (daz) if you need another tip to put me next in line .....lol

Here you go, added _dwell so you know its the file with the changes. I also included the change-log that TunerPro outputs. Enjoy. File has been corrected, no errors.


Edit Log for 551L stage 1 part 8 camchangover, boost.bin created by TunerPro.
**************************************************************************
11/20/2014 23:17:33  Table:     FTSDRLW - FSI Coil ms changed.
11/20/2014 23:17:53  Table:     FSWTM - Dwell Multiplier 2 changed.
11/20/2014 23:18:08  Table:     KFSZDUB - Dwell Time changed.
11/20/2014 23:18:33  Table:     KFTSRL - Closing Time Load/RPM changed.

thanks  ;D

AUDIMAN what xdf are you using? i tried searching for the parameters for the changes and nothing was found........ email me ratherb1@aim.com or post here thanks  .......nevermind lol found prj's thanks
but email me anyways its good to know other capable tip owners with logs.....

If a print page comes up when searching just load the page and delete "action=printpage;" from the URL.  You'll then have the regular page.

When I get home I will share my XDF. It has tons of stuff defined. It's a mix of a popular one and Daz's from like a year ago. I have my MTX plugin imported into it. I will get what I can sent to you via email since I need to put on a flash drive and transfer to my tablet.

I just got a Lonovo IdeaTab Mixx 2 8" with full Windows 8.1 and it works great. Flashes and datalog.. It's smaller then my Acer Aspire One and Quad Core but I'm still setting it up. They go used on Ebay for $110. The seller has 25 of them. I also got a 3 way OTG cable, 2 usb ports and a micro-usb for charging. Comes with 32gb internal storage but also took my 128gb microSD so it's gonna be a nice logging and flashing tool. Others should look into it.

That sounds like a really useful tool, I was thinking of porting a bunch of stuff over to android, but just using a windows tablet might be a lot , lot easier. Maybe I need a 3rd tablet...

That sounds like a really useful tool, I was thinking of porting a bunch of stuff over to android, but just using a windows tablet might be a lot , lot easier. Maybe I need a 3rd tablet...

Edit: Ordered one of these: http://www.amazon.com/HP-Stream-Windows-Includes-Personal/dp/B00NSHLVD2/ref=cm_cr_pr_product_top

Mines basically the same things as that. Specs are alittle different. But same thing basically. It's quick. Screen dpi is nice, I'm happy with it. I got the single OTG cable but I ordered the 3 way cable from China for $2.80 so it be 2 weeks b4 I see it.

Gonna finish setting it up. But everything is working great. I have a A6 and thinking about 2 different mounts for in the car. One for the air vent or the dash board kind that goes down on a sharp angle and would put the tablet right on top the air vents. I also have a cobra Bluetooth to Tape deck adaptor and have sound thru stereo and my ELM327 Bluetooth OBD2 hooked up to some apps the ELM327 came with for Windows. The one OBD2 app accesses the ecu and TCU separate. I will test them on tablet and let you know how it works.


Here's link to Tablet.
http://m.ebay.com/itm/281451861868?cmd=VIDESC

Case w/Bluetooth Keyboard
http://m.ebay.com/itm/111310550809?txnId=1297970644001

2nd OTG Cable I ordered
http://m.ebay.com/itm/371129011472?txnId=650441074024


Mount I am looking at getting
http://m.ebay.com/itm/271448865246?nav=WATCHING_ACTIVE&skus=Compatible%20Model:Lenovo%20MIIX%202&varId=570305076726

Here is the xdf I been using for over a year. Now credit for it goes to Daz for all the hard work but any mistakes or stuff that's incorrect is me. Like I said this is what I use and some info maybe wrong but it's really complete. This should be used to compile your own xdf.

right now i have a dell venue 8pro  its ok would like something better though...sometimes it can freeze ....thanks again audiman

My Stream 7 turned up, so far it seems to be working pretty happily with nef and VCDS:
(http://nefariousmotorsports.com/forum/index.php?action=dlattach;topic=7277.0;attach=12065;image)
(iphone 5 for scale)

Screen is very nice and the build quality is amazing for a $100 tablet. It feels a bit small using regular windows with the touchscreen, but metro works well, maybe a 8' tablet would be nicer. Think we should break this out into a seperate topic?

How stable are said tablets for flashing?

Provided you set the power management up properly and keep a eye on the battery life, they should be no less stable than a laptop.

Sweet looks good. And yea it's been working great for me.

Daz has been helping me tune. He's great car feels awesome. Having some trouble with my wideband install datalogging. The 3" catback I will get done next week or by weeks end of next week and then hopefully it's gonna be dialed in perfectly.

What dp's are you running? I've been holding off tuning mine until I've got rid of the precats.

I am very happy with the XSPOWER 3" Catless Flex V-Band dp's. They sound great. My friend has installed 3 sets of the same pipes after mine and said one set of DP'S touched the transmission mounts. I did contact Lee at FTG to advise him of it just for quality control. The problem was easily fixed but just a warning that if u don't pull motor and transmissions be ready to need a little bending and denting maybe. Maybe is keyword. My pipes I helped install while motor was out for a new torque converter and some boost control line repairs from rat damage. But they went on and fit great. I have pics with them installed on motor.