|
Title: Re: 4B0906018CG 360100 basic map pack Post by: dimon_707 on October 28, 2015, 02:17:25 PM Hello!
I would like to stitch the car under euro 2 with removal of the catalyst. You can send me the same file with addresses of cards which need to be corrected? Title: Re: 4B0906018CG 360100 basic map pack Post by: nyet on October 28, 2015, 07:02:04 PM Please at least try to post in the right forum.
Title: Re: Re: 4B0906018CG 360100 basic map pack Post by: adam- on October 29, 2015, 02:40:01 AM You can send me the same file with addresses of cards which need to be corrected? Why don't you upload your file, and we'll help. Not only that, the Wiki tells you EVERY single map you need to change to remove secondary O2. Why don't you have a go at helping yourself, and we'll verify. Title: Re: 4B0906018CG 360100 basic map pack Post by: dimon_707 on October 31, 2015, 06:17:08 AM I disconnected O2, control of the catalyst and SAI. Whether check please everything I correctly made.
Title: Re: 4B0906018CG 360100 basic map pack Post by: dimon_707 on November 01, 2015, 11:12:03 AM Here my last project, disconnected the second lambda, control of the catalyst and SAI. Only I can't understand what figure to put 5 or 73 in CLRHK and what to put in CWLAMBTS? Help to resolve an issue.
|