|
Title: Re-flashing a Unitronic flashed ECU for Manual from Auto Post by: tylerlb on November 09, 2015, 11:12:17 AM I'm pretty sure this is impossible but if i were to upload the 06A 906 032 DL software instead of my 06A 906 032 DM software I would lose the flash on my ECU as it basically re-writes the coding of the original file for alterations right?
I basically need to re-code the Me7.5 ECU for manual but i'd hate to lose the tune. Its just that no one wants a tuned auto ECU. Any help is greatly appreciated. Title: Re: Re-flashing a Unitronic flashed ECU for Manual from Auto Post by: ddillenger on November 09, 2015, 05:56:49 PM Yes. Flashing the ecu overwrites the calibration, aka, the tune. You can't recode the mk4 ecu.
Title: Re: Re-flashing a Unitronic flashed ECU for Manual from Auto Post by: fknbrkn on November 09, 2015, 07:02:18 PM you can recode ecu from auto to manual but not at tiptronic ecu
Title: Re: Re-flashing a Unitronic flashed ECU for Manual from Auto Post by: tylerlb on November 10, 2015, 06:46:33 AM Yes. Flashing the ecu overwrites the calibration, aka, the tune. You can't recode the mk4 ecu. Thats what i was afraid of. you can recode ecu from auto to manual but not at tiptronic ecu Apparently that only works for TDI software. Gassers won't save |