|
Title: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? Post by: nitrorocket on November 16, 2015, 07:26:36 PM I am trying to connect my K tag to my 7.1.1 ECU for a boot flash. I am not sure where to connect the grey "boot" and grey "CNF1" to the ECU board.
In this link, the bottom picture matches my ECU. am I supposed to use those circled in the picture, and if so, which one is which?? http://s4wiki.com/wiki/Boot_mode All I am trying to do here is delete the immobilizer. Title: Re: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? Post by: nitrorocket on November 17, 2015, 10:08:41 PM If anybody could help me, I would so much appreciate it. I have had my ECU sitting on my BDM table for days now waiting and researching to no avail. My K tag software states to hook the wires up a certain way, but the ecu in the pictures is not exactly what I have. The picture is wrong. :(
Title: Re: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? Post by: nyet on November 17, 2015, 11:35:37 PM http://nefariousmotorsports.com/forum/index.php?topic=417.0title=
Please read the stickies. Title: Re: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? Post by: wannabee900 on November 18, 2015, 02:30:04 AM http://nefariousmotorsports.com/forum/index.php?topic=417.0title= Stickies can be good but a few of them should really have their subject title edited to be more generic.Please read the stickies. Title: Re: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? Post by: nitrorocket on November 18, 2015, 05:28:19 PM Ive read everything, but my ktag stares to hook up grey alligator clio to boot pcb and blue alligator clamp to"CNF1".
nothing lists those or mentions them at all and anything I read? Injust wish the instruction were correct! Damn ksuite software!! Title: Re: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? Post by: nyet on November 18, 2015, 05:38:49 PM The galletto tool is free and works with just about every ftdi cable.
Title: Re: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? Post by: k0mpresd on November 18, 2015, 05:46:48 PM maybe you should contact alientech.
oh wait...... Title: Re: Where to connect "boot" and "CNF1" on ecu with Ktag on me7.1.1??? Post by: vwaudiguy on November 18, 2015, 06:09:45 PM maybe you should contact alientech. oh wait...... ;D |