Pages: [1]
Author Topic: New to this  (Read 3538 times)
stefanospong
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: May 10, 2016, 05:08:58 PM »

Hi guys, Im new using the me7 and im trying to retrieve my immo pin, can anyone kinda help me out I got stuck on this part: (adding a pic)

http://imageshack.com/a/img921/8882/scI2CQ.jpg

Thanks for your help Cheesy
« Last Edit: May 10, 2016, 05:11:07 PM by stefanospong » Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1598


« Reply #1 on: May 10, 2016, 10:53:59 PM »

Check your Device Manager and which com port your cable is using.
Logged
stefanospong
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #2 on: May 11, 2016, 07:41:16 AM »

I did, I went to Device Manager and right clicked the Properties and says port 0001 hub 0001.
I'm using a VCDS 12.12 Cable.
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1598


« Reply #3 on: May 11, 2016, 08:50:31 AM »

put your cable into dumb mode

you will find this in vcds settings

afterwards it should come as com1-4 in device manager...
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)