med9 Thermal Compound

Pages: [1]

« previous next »

Author

Topic: med9 Thermal Compound (Read 5719 times)

aef

Hero Member

Karma: +70/-46
Offline

Offline

Posts: 1601

	med9 Thermal Compound « on: April 13, 2016, 11:50:43 PM »

Hi,

is the grey area on a med9 board some kind of thermal compound and should this be renewed when closing the case?

regards


	Logged

vwaudiguy

Hero Member

Karma: +53/-37
Offline

Offline

Posts: 2024

	Re: med9 Thermal Compound « Reply #1 on: April 14, 2016, 09:21:17 AM »

Great question, I've often wondered this myself. I believe it should be renewed, but you can soften it with heat, so possibly it renews it's contact once the ecu warms.


« Last Edit: April 15, 2016, 11:35:09 AM by vwaudiguy »	Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

technic

Full Member

Karma: +18/-5
Offline

Offline

Posts: 227

	Re: Sv: med9 Thermal Compound « Reply #2 on: April 14, 2016, 11:10:04 AM »

Thermal compound to cool driver stage. Ideally remove and replace, but it is enough to just add some on top of the old before sealing the ecu.

Skickat från min SM-G800F via Tapatalk 2


	Logged

gman86

Hero Member

Karma: +45/-128
Offline

Offline

Posts: 705

	Re: med9 Thermal Compound « Reply #3 on: April 15, 2016, 03:21:14 AM »

Yet to have an ECU chuck it after being opened. As said above, once it heats up the compound softens and probably re-seals.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 10:06:10 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search