Pages: [1]
Author Topic: 2001 A6 need immobilizer delete  (Read 5036 times)
cederrowe
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 17


« on: April 19, 2016, 03:23:44 PM »

Still learning but need some help today.
Ill have to bootmode first attempt went wrong.
Attached is the original ecu read from mpps
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #1 on: April 19, 2016, 04:18:12 PM »

There is a way to delete the immo via the flash (the file you posted), but I haven't seen the method posted yet anywhere. The other way is by modifying the contents of the other unique ic on the board, the 95040 (e2p). Post that up.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
cederrowe
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 17


« Reply #2 on: April 19, 2016, 04:26:02 PM »

Ya Daz always hooked me up when I needed deletes....
Logged
_nameless
Hero Member
*****

Karma: +338/-465
Offline Offline

Posts: 2785



« Reply #3 on: April 19, 2016, 06:41:32 PM »

If you flash a 2001 s4 file 551m (manual) or 551l (auto) the flash ignores immo from EEPROM because it's a factory no immo file. See the s4 wiki for proper coding.
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
cederrowe
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 17


« Reply #4 on: April 20, 2016, 11:09:25 AM »

I tried that and it with mpps and  locked the ecu??? Ill bootmode it and try again...
Logged
turboat
Hero Member
*****

Karma: +45/-3
Offline Offline

Posts: 619


« Reply #5 on: April 22, 2016, 01:45:07 AM »

Flashing an m-box will remove the immo. Alternatively, read the eeprom using argdub's tool, flip the immo bits and checksum, write it back in bootmode.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.029 seconds with 17 queries. (Pretty URLs adds 0s, 0q)