Pages: [1]
Author Topic: Disable knock recognition  (Read 3841 times)
fmbaldani
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« on: July 19, 2016, 07:45:34 PM »

I need to disable knock retard to do some testing (NLS/LC related).

What is the best way? Maybe zero KRFKN out?

I searched quite a bit but couldnĀ“t find the answer.

Thanks a lot
Logged

'03 Audi S3 225 - FMIC / Big turbo / E100
gt-innovation
Sr. Member
****

Karma: +60/-91
Offline Offline

Posts: 449


« Reply #1 on: July 20, 2016, 09:04:12 AM »

For Misfire recognition and not knock find the appropriate codeword in ram disable while your algo is running and enable it when finished.

Logged
fmbaldani
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #2 on: July 20, 2016, 10:48:11 AM »

For Misfire recognition and not knock find the appropriate codeword in ram disable while your algo is running and enable it when finished.
My ecu is pulling timing when I use NLS/LC (common issue). I want to disable it totally for a 1/8 mile drag race this weekend.
Is there a codeword for knock recognition?
Logged

'03 Audi S3 225 - FMIC / Big turbo / E100
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035


« Reply #3 on: August 01, 2016, 08:15:40 AM »

There is no point disabling it totally, as you can damage your engine, and the car will be slower with it disabled, as you can not advance timing as far.

If you have issues with knock after LC/NLS you need to modify the LC/NLS code to disable knock control when LC/NLS is active and re-enable knock control after LC/NLS has deactivated.
That way you will not have the problem with knock retard during flatshift.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)