Jjona5
Newbie
Karma: +0/-0
 Offline
Posts: 15
|
 |
« Reply #15 on: August 14, 2016, 10:19:23 PM »
|
|
|
Start by adding a bit of KFMRES and log the results (rpm, timing, throttle plate angle) with and w/o clutch in (assuming it is a manual).
When you say add a bit of KFMRES how do you do that? pick a point on the graph and drag it up? increase all of the values slightly? There is also KFMRESK which is clutch disengaged. |
|
|
|
|
Logged
|
|
|
|
Jjona5
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #16 on: August 14, 2016, 10:25:48 PM »
|
|
|
Also I did pay a tuner who claimed could fix my readiness issues and the idle. He did neither. So I decided to learn how to do it. Bought the cable, vcds, and started on this forum. Got the readiness knocked out but still have the idle to fix. Crashing out for the night and I have a teacher work day tomorrow. So I'll check back when I can but definitely after 4 central time.
Thanks again,
J
|
|
|
|
|
Logged
|
|
|
|
|
macxxx
|
|
« Reply #17 on: August 14, 2016, 11:29:06 PM »
|
|
|
Did you try to raise idle rpm by adaptation , as I remember channel 1 using vcds/vagcom.
|
|
|
|
|
Logged
|
|
|
|
|
vwaudiguy
|
|
« Reply #18 on: August 15, 2016, 12:08:30 AM »
|
|
|
Also I did pay a tuner who claimed could fix my readiness issues and the idle. He did neither.
Did you get a refund? |
|
|
|
|
Logged
|
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
|
|
|
Jjona5
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #19 on: August 15, 2016, 04:53:11 AM »
|
|
|
Did you get a refund?
I did, didnt change anything. I could get the value to change but it didn't actually do anything. |
|
|
|
|
Logged
|
|
|
|
Jjona5
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #20 on: August 15, 2016, 04:54:32 AM »
|
|
|
Did you get a refund?
Nope, he tried quite a few times to remote flash new versions of his tune but after it bricked on me a few times he kind of gave up. It bricked a few days after he would flash it because of a checksum error. |
|
|
|
|
Logged
|
|
|
|
|
k0mpresd
|
|
« Reply #21 on: August 15, 2016, 06:46:48 AM »
|
|
|
post your original file.
|
|
|
|
|
Logged
|
|
|
|
|
Carsinc
|
|
« Reply #22 on: August 15, 2016, 06:55:06 AM »
|
|
|
Ok only because I just saw this in another thread, people have used lemmiwinks to raise the idle,
with stiffer mounts to reduce vibration. I'm not sure if increasing torque reserves or just raising
the idle is a better move I do know you only need a little more revs to smooth it out.
|
|
|
|
|
Logged
|
|
|
|
Jjona5
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #23 on: August 15, 2016, 09:18:27 AM »
|
|
|
post your original file.
This is what I'm using right now. I don't have my original file right now as I didn't know to pull it before I had it tuned first. I modified the tune I got from the tuner to fix my readiness issue and the checksum brick issue it was having. |
|
|
|
|
Logged
|
|
|
|
Jjona5
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #24 on: August 15, 2016, 09:19:20 AM »
|
|
|
Ok only because I just saw this in another thread, people have used lemmiwinks to raise the idle,
with stiffer mounts to reduce vibration. I'm not sure if increasing torque reserves or just raising
the idle is a better move I do know you only need a little more revs to smooth it out.
I tried lemmiwinks and it didnt change the idle at all. I tried multiple values and even got into vcds after I made a lemmi adjustment to make sure the values were actually changed and they were. |
|
|
|
|
Logged
|
|
|
|
|
k0mpresd
|
|
« Reply #25 on: August 15, 2016, 09:38:49 AM »
|
|
|
uh, that file is scary. you would be better off flashing back to stock.
|
|
|
|
|
Logged
|
|
|
|
Jjona5
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #26 on: August 15, 2016, 09:47:15 AM »
|
|
|
uh, that file is scary. you would be better off flashing back to stock.
Well that is exciting. |
|
|
|
|
Logged
|
|
|
|
|
vwaudiguy
|
|
« Reply #27 on: August 15, 2016, 09:48:17 AM »
|
|
|
Well that is exciting.
I'm sure your turbo feels the same. How does it run? |
|
|
|
|
Logged
|
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
|
|
|
Jjona5
Newbie
Karma: +0/-0
Offline
Posts: 15
|
|
« Reply #28 on: August 15, 2016, 03:36:46 PM »
|
|
|
Runs pretty well. I decided to buy another tune from a reputable person. I still plan on learning how to do this though. Plus I'm sure someone will want to raise their idle one day.
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #29 on: August 15, 2016, 03:38:34 PM »
|
|
|
I still plan on learning how to do this though. Plus I'm sure someone will want to raise their idle one day.
Dig through the FR. Maybe it is there. Let us know if you find it.. |
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
|
