I've tried every memory layout, and every Baud rate, fast and slow init, with key cycles and close and restart program each time, and this is my result:

Validated FTDI device is in dumb mode.
Disconnected
Connecting...
Starting slow init connection.
Connecting to address 0x01.
Slow init succeeded.
Switching to KWP1281 session.
KWP1281 connect info: 8D0907557P  1.8L R4/5VT MOTR HS D04
Ë
Connecting to address 0x01.
Slow init succeeded.
KWP1281 connect info: 8D0907557P  1.8L R4/5VT MOTR HS D04
Ë
Connecting to address 0x11.
Slow init failed.
Disconnected

Aeb is m5.92 not me7. Nefmoto is only for me7. Unless you pull the chip on the board you won't be able to read out a file. Mpps will port flash but will not read.