Pages: [1]
Author Topic: Me 7.5 1.8T AWT 4B0906018R 0261206539 swap ecu immo off  (Read 9392 times)
pompak
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 18


« on: June 05, 2017, 03:42:14 AM »

Hello.
I have an A4 1.8T AEB from 1996, I completed components on the electronics swap from me 3.2 to me 7.5, but it is a problem I tried to disable imo ME7-EDC15 EEPROM Reader 1.00 and the car starts but turns off after a second. Can someone make me a batch so I can enjoy my swap? The chip was read and write by the programmer. Chip 95040
Thanks
« Last Edit: June 05, 2017, 03:46:49 AM by pompak » Logged
adam-
Hero Member
*****

Karma: +126/-33
Offline Offline

Posts: 2181


« Reply #1 on: June 05, 2017, 05:16:10 AM »

Why not code the ECU in properly?  Never understood why people immo off.
Logged
pompak
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 18


« Reply #2 on: June 05, 2017, 08:45:44 AM »

I have old clocks from 1996, immo module is not built-in. Will not work with ecu, and that's why I would like to disable the immo.
Logged
_nameless
Hero Member
*****

Karma: +371/-3048
Offline Offline

Posts: 2962



« Reply #3 on: June 05, 2017, 11:30:15 AM »

I have old clocks from 1996, immo module is not built-in. Will not work with ecu, and that's why I would like to disable the immo.
here you are. log in is 8477
Logged

If you are broke or expecting free handouts DO NOT message me. I'll probably put you on blast if you do.
pompak
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 18


« Reply #4 on: June 07, 2017, 10:16:35 AM »

Everything works, thank you for your help Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 5.216 seconds with 16 queries. (Pretty URLs adds 0s, 0q)