Pages: [1]
Author Topic: Me 7.5 1.8T AWT 4B0906018R 0261206539 swap ecu immo off  (Read 7166 times)
pompak
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 15


« on: June 05, 2017, 03:42:14 AM »

Hello.
I have an A4 1.8T AEB from 1996, I completed components on the electronics swap from me 3.2 to me 7.5, but it is a problem I tried to disable imo ME7-EDC15 EEPROM Reader 1.00 and the car starts but turns off after a second. Can someone make me a batch so I can enjoy my swap? The chip was read and write by the programmer. Chip 95040
Thanks
« Last Edit: June 05, 2017, 03:46:49 AM by pompak » Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2178


« Reply #1 on: June 05, 2017, 05:16:10 AM »

Why not code the ECU in properly?  Never understood why people immo off.
Logged
pompak
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 15


« Reply #2 on: June 05, 2017, 08:45:44 AM »

I have old clocks from 1996, immo module is not built-in. Will not work with ecu, and that's why I would like to disable the immo.
Logged
_nameless
Hero Member
*****

Karma: +321/-449
Offline Offline

Posts: 2682



« Reply #3 on: June 05, 2017, 11:30:15 AM »

I have old clocks from 1996, immo module is not built-in. Will not work with ecu, and that's why I would like to disable the immo.
here you are. log in is 8477
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
pompak
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 15


« Reply #4 on: June 07, 2017, 10:16:35 AM »

Everything works, thank you for your help Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 18 queries. (Pretty URLs adds 0s, 0q)