Pages: [1]
Author Topic: ME7.1.1 Are Not all the same! 8E0909559D ECU Cannot Be Flashed With 8E0910560G  (Read 3984 times)
kingkhalilz
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 123



Anyone ever herd of this or can shed some light on why this is the case I would appreciate it.

Had an extra a6 3.0 ECU (8E0909559D) Bootmode Galleto Flashed B6 S4 File in (8E0910560G). Read the file back out perfect but the ecu wouldnt connect to anything or start the vehicle. Used a different b6 s4 ecu and had no issues. Then flashing a6 3.0 ECU back to similar software worked no problem.

Conclusion they are incompatible.

Thanks!
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070



CPU clock speed is most likely different
Logged

I have no logs because I have a boost gauge (makes things easier)
kingkhalilz
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 123



CPU clock speed is most likely different

Hmm how many different clock speeds are there? Can you re clock it?
Logged
Gonzo
Sr. Member
****

Karma: +21/-30
Offline Offline

Posts: 483



Did you check to see if they were both C167?

If they were both ST10 you need to make sure its the same CPU and you need to flash both iRom and xRom
Logged
kingkhalilz
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 123



Both st10

Irom and xrom i will look into that.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)