KRKTE and TVUB Confirmation - Siemens Deka 80lb (875cc)

Pages: [1]

« previous next »

Author

Topic: KRKTE and TVUB Confirmation - Siemens Deka 80lb (875cc) (Read 5017 times)

PaulB

Newbie

Karma: +1/-0
Offline

Offline

Posts: 17

	KRKTE and TVUB Confirmation - Siemens Deka 80lb (875cc) « on: September 24, 2018, 07:13:17 AM »

Hello!

I would like to make a confirmation for KRKTE and TVUB calculation ..

Engine : 1.8T 20V
Displacement : 1984cc (stroked engine )

KRKTE : 0.03905238 ( aprox )
TVUB : Is the FNPW_OFFSET on the TVUB.jpg file? Roll Eyes


	Logged

eg4

Jr. Member

Karma: +3/-2
Offline

Offline

Posts: 27

	Re: KRKTE and TVUB Confirmation - Siemens Deka 80lb (875cc) « Reply #1 on: September 26, 2018, 02:16:47 AM »

you can use this calculator for krkte http://nefariousmotorsports.com/forum/index.php?topic=4021.0 and fnpw_offset is your tvub. But it depends from the fuelpressure


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: KRKTE and TVUB Confirmation - Siemens Deka 80lb (875cc) « Reply #2 on: September 26, 2018, 10:03:30 AM »

Note that both offset and krkte depend on pressure.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

PaulB

Newbie

Karma: +1/-0
Offline

Offline

Posts: 17

	Re: KRKTE and TVUB Confirmation - Siemens Deka 80lb (875cc) « Reply #3 on: September 27, 2018, 07:16:13 AM »

Hello!!
Thank you !

I will keep the stock 3bar frp! So i suppose the TVUB will be ok..

Also , do i need to modify the Volt axis on the TVUB map ,so they correspond with the siemens deka ''fnpw_offset'' Values?


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: KRKTE and TVUB Confirmation - Siemens Deka 80lb (875cc) « Reply #4 on: September 27, 2018, 07:56:42 AM »

Quote from: PaulB on September 27, 2018, 07:16:13 AM

I will keep the stock 3bar frp! So i suppose the TVUB will be ok..

Note that not all FPRs are 3bar stock, 3 bar is only commonly used as a reference pressure for fuel injectors.

Quote

Also , do i need to modify the Volt axis on the TVUB map ,so they correspond with the siemens deka ''fnpw_offset'' Values?

Yes, or re-interpolate.

Also, like flow, TVUB also more or less scales linearly (albeit not quite) with the square root of fuel pressure (as a very rough approximation). Some injector datasheets come with a method for approximating TVUB with respect to voltage and pressure, some have complete charts.

eg. for ev14:
https://nyet.org/cars/info/ev14-latency/


« Last Edit: September 27, 2018, 08:02:52 AM by nyet »	Logged

PaulB

Newbie

Karma: +1/-0
Offline

Offline

Posts: 17

	Re: KRKTE and TVUB Confirmation - Siemens Deka 80lb (875cc) « Reply #5 on: September 29, 2018, 11:42:02 AM »

I have the stock 3bar frp , thats for sure..

I Think i will start with the mentioned values and see the STFT..

maybe i will make FKKVS and HFM 1's .. No?


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12271

	Re: KRKTE and TVUB Confirmation - Siemens Deka 80lb (875cc) « Reply #6 on: September 29, 2018, 12:57:29 PM »

Quote from: PaulB on September 29, 2018, 11:42:02 AM

I have the stock 3bar frp , thats for sure..

I Think i will start with the mentioned values and see the STFT..

maybe i will make FKKVS and HFM 1's .. No?

More than one way to skin a cat, but in general, you can all ones FKKVS to start with, and if possible start with a known good stock HFM that matches your MAF and intake setup. If you have a cone filter or any other CAI setup, all bets are off.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 30, 2024, 03:49:16 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search