Pages: [1]
Author Topic: ME17.5  (Read 4322 times)
JWebber
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« on: November 12, 2018, 03:54:18 PM »

I have done a little searching on here and have not found a lot of info on this version of ECU . Most of the threads I found were quite old ( 2013 or so ) . Is there not much support for this platform , or are there just not that many people messing with them ? The ECU and harness I have came out of a 2010 Jetta . 07K 906 055 M BENZIN ME17.5 , engine code CBUA .
« Last Edit: November 15, 2018, 03:42:58 PM by JWebber » Logged
aef
Hero Member
*****

Karma: +77/-55
Offline Offline

Posts: 1682


« Reply #1 on: November 12, 2018, 11:50:12 PM »

There is not a single question involved here.

This is a diy board and there is no freeware or cheap tool to read and write this ecu.
Logged
Blazius
Hero Member
*****

Karma: +95/-46
Offline Offline

Posts: 1291



« Reply #2 on: November 13, 2018, 03:00:50 AM »

AFAIK, this tool is mostly for ME7 ecu's and some other ones but not any newers , so I do not think you will get help about that ECU here Tongue
Logged
_nameless
Hero Member
*****

Karma: +374/-3442
Offline Offline

Posts: 3008



« Reply #3 on: November 13, 2018, 05:06:09 AM »

I've done them. Immo off, engine swaps, hardware deletes  feel free to pm me
Logged

If you are broke or expecting free handouts DO NOT message me. I'll probably put you on blast if you do.
JWebber
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #4 on: November 16, 2018, 08:03:42 PM »

I've done them. Immo off, engine swaps, hardware deletes  feel free to pm me
I have tried to send you PMs . Everytime I hit send ,,,, the message vanishes .
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 2.418 seconds with 16 queries. (Pretty URLs adds 0s, 0q)